Foreign technical barriers will affect China's LED industry exports

At present, China's LED export industry is facing a new round of impact on foreign technology barriers, which has a greater impact on the LED export industry. Statistics show that since 2012, the United States, the European Union, Japan and other countries and regions have successively implemented LED industry related standards. On February 1 this year, the EU stipulated that all lamps entering the EU must strengthen the EMF (electromagnetic field) test. Recently, the European Union issued the "Latest Energy Efficiency Regulations for LED Lighting Products", requiring all LED lighting products exported to Europe to meet the new energy efficiency standards from September 1 this year, and will be divided into September 1st, September 2014. On the 1st, September 1st, 2016, the energy efficiency standards for LED lighting products will be gradually improved.
The continuous introduction of technical barriers has had a major impact on China's LED export industry: First, the risk of export enterprises has increased. The gradual increase in technical standards has led to a continuous increase in the rate of notification of export products, and a significant increase in corporate export risks. Taking the export of EU products as an example, from January to June 2013, the EU RAPEX notification involved 54 lighting products in China, including 19 LED lights, accounting for 35.18 of the total number of notified lamps, up 23.61 year-on-year; second, the cost of enterprises increased. Taking the EU's Latest Energy Efficiency Regulations for LED Lighting Products as an example, in the second phase of the implementation of the new regulations, after September 1, 2014, LED lamps with an energy efficiency index above 0.2 will enter the EU market, equivalent to the current national standards. 2.2 times the requirement, the certification and spot check fees of each specification product are above RMB 10,000, which directly leads to the increase of the production cost of LED lamps by more than 20 yuan. The rated life test of LED lamps in the United States takes about 9 to 12 months, which extends the access time of LED products.
To this end, the inspection and quarantine department recommends: First, enterprises should strengthen the construction of core technologies, carefully study the relevant laws, regulations and standards in foreign markets, and do a good job in dealing with technical trade measures; second, establish foreign-recognized testing laboratories to reduce testing. Costs and production costs of enterprises; Third, actively explore emerging markets such as Latin America, Africa, the Middle East and Southeast Asia, and reduce dependence on European and American markets.

Double Braided Nylon Rope / SPM

SPM rope is in adopting a double circular structure. This is a kind of innovation design, compared with the traditional structure of the ropes, double braided Nylon Rope has higher strength and better abrasion resistance and longer service life.
Both eyes in the end are come with a metal thimble, polyester jacket should be covering the rope where it has the thimble (the thickness of jacket is not less than 6 mm), then the rope outer coating a layer of polyurethane glue, to increase the wear resistance of the rope. The rope from the set of 25 feet began to add floating ring, the number of floating shall meet the prescribed requirements.
Rope manufacturing OCIMF standard requirements.

Double Braided Nylon Rope(SPM)

Double Braided Nylon Rope,Polyester Nylon Double Braided Rope,White Double Braided Nylon Rope,8 Strands Braided Rope,Double Braided Rope

Jiangsu Xiangchuan Rope Technology Co., Ltd. ,