How to choose rotameter

1, small and medium flow, small flow. The glass rotor flowmeter can be used for local indication of the fluid flow with less than 1 MPa pressure, clean and transparent, non-toxic, non-toxic and non-adhesive glass flow rate below 100°C.

2. It is easy to vaporize, easy to condense, toxic, flammable, explosive, non-magnetic material, fiber and wear material, and non-corrosive fluid in stainless steel, medium and small flow measurement, when local indication or remote transmission signal is needed, The use of common metal tube rotor flowmeter 3, when the measured medium is easy to crystallize or vaporize or high viscosity, can be used with a jacketed metal tube rotor flowmeter. Pass the heating or cooling medium in the jacket.

4. When the measuring medium is corrosive, an anti-corrosion metal tube rotameter can be used.

5. Installation of rotameter The rotameter requires vertical installation and the inclination is not more than 50. Most of the fluids are from the bottom up. Special metal tube rotameters can be connected horizontally. The installation location should be less vibrating and easy to observe and maintain. It should be provided with downstream shut-off valves and bypass valves. For dirty media, a filter must be added at the inlet of the flowmeter.