From the recently concluded the fourteenth session of the National Methanol Technology Conference was informed that a combination of new technologies at home and abroad, the development of new materials, reciprocating compressors, new valve, after Bo Wenzhou, Zhejiang Bo Technology Co., Ltd. for many years of painstaking research , Has now come out, and began to equip the field of chemical production. It is understood that Bo Lei is a company specializing in chemical, fertilizer sets of compressor products development, production technology joint-stock company, with its own gas compressor design and development of the complete sets of equipment capacity. The company has developed a non-oil-lubricated carbon dioxide compressor, ammonia nitrogen with a hydrogen compressor and other products. The successful development of the reciprocating compressor new valve has a unique mechanical and thermal properties, super anti-pollution and corrosion resistance, but also has the characteristics of impact resistance. At present, the valve has successfully entered the field of process. Compared with the sheet valve, the valve uses a streamlined design, reducing debris entry, improve the reliability of the compressor, it is more durable than the ordinary metal valve, especially in the coal chemical industry, fertilizer production, normal working conditions Under the life of the valve structure than the average life expectancy increased by 4 to 6 times.
In general, some metal sheets are formed by hand or die stamping to produce plastic deformation, forming the desired shape and size, and can be further welded or a small amount of mechanical processing to form more complex parts.
Stamping process is a kind of metal processing method, which is based on the plastic deformation of metal, and USES the mould and stamping equipment to apply pressure on the Sheet Metal, so that the sheet metal produces plastic deformation or separation, so as to obtain the parts (stamping parts) with certain shape, size and performance.
Stamping forming technology in automobile body manufacturing process occupies an important position, especially large automobile body covering parts, because the most complicated shape, the structure of large size, some still space curved surface, and surface quality requirement is high, so use stamping processing method is used to make these parts can't be matched by other processing methods.The cab of the truck, the Sheet Metal Parts in the front of the truck, the van board, the various body coverings of the car and the various skeleton of the bus are almost all made by stamping.
Sheet Metal Stamping
Sheet Metal Stamping,Sheet Metal Stamping Parts,Stamping Bending Plate,Bending Stamping Parts
YaoPeng Metal Products Co., Ltd. , https://www.ypmfg.com