The light of a car is like the eyes of a car, whether it is day or night, it is playing a role, but because it is mainly glass electronic products, it is also relatively delicate. If you use it improperly, it will degrade the life of the lights and cause a series of failures. Therefore, knowing the relevant knowledge about the use of lights, you can use the lights better to ensure the safety of driving.
PART1 lights will fail
In addition to the normal life expectancy of the lights, problems with the lights are generally related to the quality of the lights, and the other is related to illegal modifications. Headlights are most afraid of water, if the lamp is not sealed well, it is easy to have water vapor, filaments, etc. it is easy to BURN OUT, and the reflective surface is also easy to change color, so the light after the failure of the light there is a problem.
remind:
If the owner finds a fog in the morning when he is driving, if the fog is removed within 40 minutes after the lamp is turned off, there will be no problem with the headlights. If the headlight fog is still there after one hour, It shows that there is a problem with the seal of the lights. The headlights will not be a problem. First of all, it is related to the quality. In addition, it is related to the installation. If there is a problem with the lights in the maintenance process and the cooperation between different programs is not good enough, there may be cases where the seal is not good.
How PART2 Prevents Headlights from Malfunctioning
If the lights do not malfunction, you should pay attention to the normal use. First of all, the lights cannot be soaked in water. When the car is driving, the water splashed from the front will not affect the lights. If you open the front cover when washing the car, use a water pressure gun to flush the engine and headlights. , then the lights are very easy to enter the water at this time, some manufacturers have stipulated that the car wash can only use the cloth to scrub the engine, but not water. Because the plastic used in the fixed installation position of the lamp is only a dustproof function, it does not have a waterproof function.
remind:
It is better to use the original parts of the lights, and the illegally modified lights may melt, burst, or reflect incorrectly. During the installation of the lights, Toyota stipulated that it was not possible to touch the light bulb with your hand because if there was sweat left on the light, the light might burst. In addition, when the lights are modified, they must meet the original requirements of the car. For example, the specified wattage of the lights, the use of xenon lamps or halogen lamps, etc., the situation that the lights enter the fog is still relatively easy to distinguish, and other situations arise. It is necessary to quickly repair. Now the lights use more electronic components and use more high-voltage power, so be careful about the voltage of the lights when refitting them.
How PART3 owners self-test light failure
If the owner feels that the lights are not suitable or unsatisfactory when used, it is best to go to the 4S store for repair or commissioning. High-beam lights do not have the effect of concentrating, and low-beam lights have the effect of concentrating light. However, high-beam lights do not mean that the higher the better. When 4S shops are doing car maintenance, they mainly look at the brightness and height of the lights, whether there is water, whether they have bursts, etc. The lights are still easy to identify if there are any problems in the maintenance process. However, if the owner wants to identify whether there is a problem with the lights, he or she mainly depends on the intensity of the lights, whether there is spotlight, or whether there is water in the water.
In general, dim lights, non-condensing light, water intake, and dust infiltration are indifferent to many car owners. They will not be dealt with at all. Generally, car owners after four or five years will not be able to control the situation. It cannot be passed unless it is said to be an annual review. In this case, some car owners will choose to return to the 4S shop for repairs. However, this situation is not suitable because there are problems with the lights. Regardless of size, they will pose a certain threat to traffic safety. Therefore, regardless of whether or not the annual inspection, as long as the lights have a condition, they must promptly return to the factory for inspection and maintenance.
remind:
The quality of the original parts of the factory will not be a problem, and vice-plant parts may have various problems. For the 4S shop, there are not many ways to distinguish the original parts from the vice parts. In general, the original parts have confidence in the quality. Therefore, the sales date will not be posted at the time of sales, and the sub-plant parts will be sold. Date to determine the warranty time. Another way to distinguish is to see the clarity of the relevant logo.
Nylon Metallic Lace,Metallic Flower Lace,Nylon Metallic Fabric,Nylon Metallic Flower Lace Fabric
SHAOXING LANGDENG IMP&EXP CO.,LTD , https://www.ldfabric.com