Overall Dimension | ||
Length(with bucket on ground) | 5850(mm) | |
Width(to outside of wheels) | 2050(mm) | |
Height(To the top of the cab) | 2860(mm) | |
Wheel base | 2400(mm) | |
Tread | 1640(mm) | |
Min. ground clearance | 310(mm) | |
Main Technical Specification | ||
Rated load | 2000(Kg) | |
Operating weight | 5200KG | |
Rated bucket capacity | 1.2(CBM) | |
Bucket type | Heavy-duty bolt teeth | |
Max. breakout force             | 51kN | |
Max. dump clearance | 2950(mm) | |
Min. turning radius | 5251mm | |
Driving system | Hydraulic converter | |
Traveling speed(Km/h) | 2 forward and 2 reverse | |
Diesel engine | ||
 Model | WEICHAI 4105 OR CUMMINS 4BT3.9-C100                                    |
|
Type | In-line arrangement. Water cooling | |
Rated output | 60(kW) OR 75KW | |
Inter-bore of cylinder/stroke | 108 (mm) | |
Rated speed | 2400(r/min) | |
Max. Torque | 275(N.M) | |
Starting type | Electric | |
Min. specific fuel consumption | 235(g/Kw.h) | |
Transmission System | ||
Torque Converter | ||
Model | YJ280 | |
Type | Fixed-spindle power shift | |
Cooling type | Pressure oil circulating | |
Transmission case | ||
Model | MAP | |
Type | Power  shift, spur gear constantly in mesh | |
Gear shift position | 2 Forward and 2 reverse gears | |
Axle and Tire | ||
Type of main reducer | spiral bevel gear, single stage | |
Size of tire | 20.5/70-16,16.70-20 for optional | |
Brake system | ||
Service brake | Air assisted oil on four wheel | |
Parking brake | Hand operated | |
Steering  System | ||
Type | Middle articulated frame with hydraulic power steering |
Sandwich Panel Roll Forming Machine is designed to produce fabricated panels for factories, warehouses and house. The line applies E. P. S, Glass & Mineral Wool, Polyurethane and cuts to required length.
It is the best material for wall and roof of electronic, medicine, precise machinery and general factories and warehouses.
Sandwich Panel Roll Forming Machine is to produce panels for constructing factories, warehouses and houses.
After forming 0. 4 ~ 0. 5 mm pre-painted steel sheets, the line attaches them to EPS (Expanded Polystyrene) and cuts into required size. Roof and wall panels can be produced by the same machine.
This line suitable to process outer side of sandwich panel,materials sheet are colored steel sheet, aluminium steel sheet, stainless steel sheet and so on.The inner side materials are flame retardant EPS, rock wool and so on.
Sandwich Panel Roll Forming Machine Line
Roof Panel Roll Forming Machine, EPS Sandwich Panel Machine, Sandwich Panel Production Line, Aluminium Composite Panel Machine
BOTOU XINGHE ROLL FORMING MACHINERY CO.,LTD , http://www.xhrollformingmachine.com