Model | Width/mm | Mesh size(inch) | Wire diameter(mm) | No. of twists | Weight(T) | Motor power |
NW15 | 1200-2000 | 1/2 | ≤0.6 | 3 or 5 | 2.5 | 2.2 |
NW18 | 1200-2000 | 3/4 | ≤0.7 | 3 or 5 | 2.5 | 2.2 |
NW20 | 1200-2000 | 5/8 | ≤0.8 | 3 or 5 | 2.5 | 2.2 |
NW25 | 1200-2000 | 1.0 | ≤0.9 | 3 or 5 | 2.5 | 2.2 |
NW40 | 1200-2000 | 1.5 | ≤1.0 | 3 or 5 | 2.5 | 2.2 |
NW50 | 1200-2000 | 2.0 | ≤1.6 | 3 or 5 | 2.5 | 2.2 |
NW60 | 1200-2000 | 2.5 | ≤1.8 | 3 or 5 | 2.5 | 2.2 |
Model | Rated Sisze of Cell(mm)L | Max Net Breadthmm | Max Thread Diameter(mm) | Theoretical productivity | Dimensions(L*W*H)mm | Weight(T) | ||
Single | Double | Mesh/min | M2/h | |||||
ZJ1/2 | 16 | 2490 | 1200 | 0.75 | 38 | 50 | 4500x2200x1450 | 4.6 |
ZJ3/4 | 22.85 | 2490 | 1200 | 1.0 | 38 | 62 | 4500x2200x1450 | 4.6 |
ZJ1 | 28.667 | 2490 | 1200 | 1.2 | 38 | 66 | 4500x2200x1450 | 4.6 |
ZJ1.2 | 34.7 | 2490 | 1200 | 1.2 | 38 | 99 | 4500x2200x1450 | 4.6 |
ZJ1.5 | 43 | 2490 | 1200 | 1.4 | 38 | 131 | 4500x2200x1450 | 4.6 |
ZJ2 | 57.334 | 2490 | 1200 | 1.6 | 38 | 169 | 4500x2200x1450 | 4.6 |
ZJ3 | 86 | 2490 | 1200 | 1.8 | 38 | 169 | 4500x2200x1450 | 4.6 |
As we know many plastic toys are made by injection moulding, toys made in plastic have advantages of good strength, colorful decoration, light weight, complex design are possible, and the cost is economic.
The biggest market of plastic toys is in China, as well as it is the biggest producer, many world famous plastic toys producer established their research center and manufacturing facilities in China, so the Plastic Injection Mould manufacturer is more than more competitive, we believe a nice mould factory is always popular, 3K Mold can offer you a quality mould and good after service, please contact our sales for more information about our company and service.
Toy Plastic Injection Mould
Toy Injection Mould,Rapid Injection Molding,Injection Molded Plastic Toy Parts,Insert Molded Plastics
3K Mold Co., Limited ,