What type of ore is the practical treatment of the fan-shaped chute?

The shape of the sector chute is shown in Figure 37 . Its ore supply end is wider, and the closer it is to the end of the discharge end, the smaller the cross section.

Figure 37 Schematic diagram of the fan chute

L— to the mine mouth; 2— sidewall; 3— slot low; 4— sector version; 5— splitter

Its working principle is that when the solid content accounts for 50 % to 60 % of the slurry, the slurry enters the chute from the front end and flows to the tipping end. Since the inclination of the chute is not too large ( generally 15° to 18°) , the concentration of the slurry is large, and a very smooth ore flow can be obtained. Like other chutes, the solid material is stratified by density during the flow. The lowermost heavy minerals rub against the bottom of the chute, so the flow rate is very slow, and the upper layers of minerals are lighter, so the flow rate with water is very fast. As the chute gradually tapers, the resulting flow layers are vertically separated, with the result that the speed difference is increasing. Due to the different pulp discharge speeds of each layer, a fan surface is formed at the discharge end, which can be divided into heavy products, medium mines and light products by means of the cut-off plates.

Fan chute widely used treatment of low grade sands, iron ore is also treated fine fraction, tin tungsten ores and minerals, but not as coarse-grained high processing effect.

Lift Platform:

Lifting platform is a vertical transport of people or things lifting machinery. Also refers to the vertical conveying equipment in the logistics systems such as factories and automatic warehouses, and the lifting platform is often equipped with various flat conveying equipment, which serves as the connecting device of conveying lines of different heights.

Generally USES the hydraulic pressure drive, therefore calls the hydraulic elevator platform. In addition to the transport of goods at different heights, it is widely used in installation, maintenance and other operations at high altitude.

The characteristics of the lifting platform free lift has been widely used in municipal maintenance, terminal, cargo transportation logistics center, building upholster, etc., installed the automobile chassis, storage battery car chassis, such as free walk, work height space also change, with light weight, walking, electric start, since the leg, the operation is simple, operation is big, will overcome obstacles 360 degrees to rotate aerial work, as well as merits.

The Main Types Of Lift Platform:

Application Area: 

Lift Platform is widely used in workshop maintenance, industrial installation, equipment overhaul, property management, warehouse, aviation, airport, port, station, gas station, stadium, exhibition hall and other places.

If you have any questions, please contact with us directly. Lift Platform are produced with High Quality and Good Appearance. Welcome you can visit our Factory. For inqury, Please send mail directly to us.

Lift Platform

Self-Propelled Scissor Lift,Truck Mounted Scissor Lift,Stationary Scissor Cargo Lift,Folding Boom Lift

Jinan East Machinery Co.,Ltd. , https://www.jneastmach.com