Concrete mixer truck seven "Q" seven "Answer"
What is the mixer truck?
A: The mixer tug is a bearing. Use this to support the tank. It is integrated with the mixer and aids in mixing.
Second, how to change the hydraulic pump mixer truck?
A: Generally do not recommend that you change, directly to the sale to find professional personnel replacement, and the use of oil must meet the requirements, otherwise the equipment will be greatly damaged, the service life will be greatly shortened, replace the reasonable number of hydraulic oil.
3. What is the relationship between the filling rate of the cement mixer tank and the inclination of the tank?
A: At present, the tilt angle of the mixer is about 12 degrees, and the filling rate is about 63%. Poor inclination is difficult to measure and filling rate is also difficult to calculate. At present, the sales mixers are based on the effective mixing volume.
Fourth, the concrete mixer tank does not turn, turned to no power and hydraulic oil spray from the tank fuel port is what reason?
A: The hydraulic pressure will go back one by one. The failure of the hydraulic pump may be caused by the closed part of the oil pump. Back to the oil rush, it may be that the closed pad of the pump is broken. Look for another pad.
Fifth, how much is the speed of the mixing bucket of a concrete mixer?
Answer: The speed of the mixing drum when feeding: 6-10 rpm; the speed of the mixing drum when mixing: 6-10 rpm.
What is the distance from the inlet of the concrete mixer to the ground of the 8-12 square concrete mixer?
A: Generally, the height of the 8-12 square mixer truck is about 3.8 meters, and the feed inlet is about 3.5-meters from the ground, depending on different models.
Seven, cement mixer how to clean the tank? .
Answer: The water tank of the mixer truck should be filled with water after each unloading. When it is returned, it should be stirred and exercised. After the mixing station, the water will be discharged again. The tank's internal surface should be cleaned as it fills the tank. Of course, it can also be washed directly in the water tank. If the grout has already solidified, find a professional clear tank in the tank, the surface solidified with oxalic acid scrub on the line.
SHANDONG PSL is specialized in water supply and drainage system`s design - production -marketing - after service. We can make products according to GB, ASTM, DIN, JIS and ISO standards, as well as the non- standard products.Our PVC pipe fittings are produced for PVC pipeline or PE pipeline.The coating is eposy powder with WRAS certificate.We can offer various sizes MOPVC pipe fittings in order to our clients requirements.
MOPVC Pipe Fitting,MOPVC Flanged Socket,MOPVC Flanged Spigot ,Double socket bend ,Flange socket bend.All socket bend,MOPVC End Cap
SHANDONG PIPESOL FLOW EQUIPMENT CO.,LTD , https://www.sinopipesol.com