Fast's gearbox is like this. If you are parking in the high-end area, the synchronizer of the sub-box is directly in contact with the front drive wheel. At this time the main box is empty, but the sub-box is high-end, if Now even if the first gear of the main box is hung, the consequences of starting may very well cause the pins of the locking pin synchronizer to break.
When the correct Fast Transmission is parked on operation, the control system must be parked in the neutral zone, and if there is a problem with the clutch part of the vehicle, the file will ring, similar to the case where the separation is not complete.
" Fast high and low gearboxes are forbidden to park in the upmarket area." Experts on the correct operation of the Fast transmission , the result of misuse is the harm of the neutral parking in the high-end area, not only easy to hang up into the file, but also easy to cause the pins of the pin-pin synchronizer to break.
Fast Transmission has a market share of more than 80% in the heavy truck market and is used in many heavy trucks. The majority of driver friends should strictly follow the instructions provided by the manufacturer when using such high and low range transmissions to avoid unnecessary damage to the car.
Semi-welded plate evaporator has wide plate gaps, wide channel openings and laser welding, which enable them to perform vacuum and low pressure evaporation processes in both water-based and organic-containing systems.
Evaporator can be considered the point of heat capture in a refrigeration system and provides the cooling effect required for any particular application.There are almost as many different types of evaporators as there are applications of heat exchanger. However,evaporators are divided in to two categories such as (i)direct cooler evaporators that cool air that,in turn,cools the product and(ii) indirect cooler evaporators that cool a liquid such as brine solution that, in turn, cools the product. Normally, the proper evaporator comes with the system. However, there may be an occasion when designing a system, so one will need to determine the requirements and select the proper evaporator from a manufacturer's catalog or manual.
In practice,the following evaporators are commonly used for cooling,refrigerating,freezing,and air conditioning applications:•liquid coolers,•air coolers, and/or gas coolers.
Shell and tube type heat exchangers are the more common form of evaporation units for water cooling and chilling applications.
Evaporator,Semi Welded Evaporator,Rising Film Plate Evaporator,Milk Evaporator Heat Exchanger
Jiangsu Baode Heat-Exchanger Equipment Co.,LTD , https://www.baodehex.com