Dana’s EBITDA rose 2.8% YoY

Dana Holding Corporation has announced the financial report for the first half of the year, as follows:

In the second quarter of this year, Dana’s operating income fell from US$1.8 billion in the same period last year to US$1.71 billion, a decrease of 5.0%; in the second quarter, EBITDA decreased by 1.3% from the same period last year to US$150 million; Net profit for the quarter was $90 million, which was 6.2% lower than the $96 million in the same period in 2013.

In the second quarter of the year, the Power Technologies Division was one of the largest companies in the business sector. It once again became Dana’s only unit with sales growth. In the second quarter sales reached US$280 million, an increase of 4.1% year-on-year; Second-quarter sales were US$640 million, down 5.5% year-on-year; sales of commercial vehicle and off-road vehicles were US$460 million and US$340 million, respectively, which were also down 7.0% and 7.5% respectively from the same period of last year.

In the first half of this year, Dana’s operating income was 3.4 billion U.S. dollars, which was 2.2% lower than the 3.48 billion U.S. dollars in the same period of last year. In the first half of the year, Dana’s pre-tax profits increased from 240 million U.S. dollars in the same period last year to 250 million U.S. dollars, an increase of 2.8%. In the first half of the year, Dana’s net profit was 130 million U.S. dollars, which was 13.0% lower than the 150 million U.S. dollars in the same period of last year.

In the first half of this year, the power technology department's business maintained a steady growth, and other departments' businesses all experienced different degrees of decline. In the first half of the year, the sales of power technology department reached 550 million U.S. dollars, up 5.2% year-on-year. In the second quarter, the sales volume of light vehicle drive systems division was 1.25 billion U.S. dollars, down 2.9% year-on-year. Sales volume of commercial vehicle and off-road vehicle business divisions were respectively It was 920 million U.S. dollars and 680 million U.S. dollars, also down 3.7% and 4.3% respectively from the same period of last year.

Air Filters are the first line of defense to foreign contaminants which will decrease the life of your compressed air system and compressor oil. We guarantee that all of our compressed air filters will fit your compressor, vacuum pump or blower based on the OEM part number. Inlet air filters should be routinely monitored in order to insure that you are geting the most out of your air compressor, vacuum pump or blower. We do not recommend blowing out the inlet filter when it becomes clogged, instead it should be replaced. Depending on the environment, your Air Filter should be inspected at least once per month. Please contact our sales team with any questions regarding your air filter or maintenance on your compressed air system.
Most of our compressed air filters are made with a micron rating of 5 or 10 depending on the OEM specifications set forth by each manufacturer. We carry a wide range of air filters for all the major manufacturers of Rotary Screw, Reciprocating and centrifugal air compressors. Air Compressor Services also supplies air flers for blowers and vacuum pumps. Our air filters for compressors are manufactured with the highest quality fiter media available to provide continued protection for your compressed air system.Spin-On Oil Filter Element-Simple removal by spinning off and replacing the element. Manufactured of synthetic, paper, metal mesh or cloth, with a micron rating which varies based on manufacturer specifications.
The proper selection and use of compressed air filters will prevent many short and long term problems with your compressed air equipment and systems and save you substantialy in down-time and component replacement costs over the life of your compressed air system.
Oil Filters present the second barrier of protection. These are usually rated at 10 to 20 microns. Filter Material is also paper or synthetic, and can be surface loading or depth loading.
(contaminants enter the filter media and are trapped within the depth of the media, rather than only on the surface.)

Canister(Cartridge) Oil Filter Element-This consists of an element inside a metal canister. The canister must be opened, and the new filter installed inside the cavity. This element may be a variety of materials(metal mesh, synthetic, paper, or cloth) and will be manufactured with micron ratings compatible to the OEM specifications.Sinofiltec offers branded and high quality replacement filters for all domestic and international compressor OEMs. 

Air Filter for Screw Air CompressorHigh quality Screw air compressor air filtercompressor air filter elementIngersoll Rand Air FilterAtlas Copco inlet air filter


   

Compressor Air Filters

Compressor Air Filters,Compressed Air Filter,Air Compressor Air Filter

Henan Sinofiltec Technology Co.,Ltd , http://www.sinofiltec.com