Circular Coil Slitting Knife for Metallurgical
| 60 x 5 x 16 x 24 x 88° |
| 60 x 5.2 x 16 x 28 x 90° |
| 75 x 5.6 x 18 x 28 x 90° |
| 75 x 6.4 x 18 x 32 x 92° |
| 80 x 7 x 19 x 32 x 92° |
| 80 x 7.4 x 19 x 36 x 94° |
| 90 x 7.4 x 20 x 40 x 95° |
| 90 x 8 x 20 x 40 x 95° |
| 100 x 8.5 x 22 x 40 x 95° |
| 100 x 9 x 22 x 48x 96° |
| External diameter | Tooth width | Bore | No. of teeth | Angle |
| 60 | 5 | 16 | 24 |  88° |
| 60 | 5.2 | 16 | 28 |  90° |
| 75 | 5.6 | 18 | 28 |  90° |
| 75 | 6.4 | 18 | 32 |  92° |
| 80 | 7 | 19 | 32 |  92° |
| 80 | 7.4 | 19 | 36 |  94° |
| 90 | 8 | 20 | 40 |  94° |
| 90 | 8.5 | 20 | 40 |  95° |
| 100 | 8.5 | 22 | 48 |  95° |
| 100 | 9 | 22 | 48 |  96° |
Circular shearing blade is made of T10,6CrW2Si,Cr12MoV,Ld,H13,etc good quality too steel and high alloy steel,with smooth sheaing edge,dlade is sharp and durable.
Blade most used in sheet metal slitting and shearing,Maximum diameter we can manufacture is 1.2 meter.
Blade manufactured is with high precision and parallelism by 0.002mm.
Application field.
1.Steel mills
2.Cold rolled mills.
3.packing material factory.
4.Shearing machine manufacturer.
5.Steel strpl mills.
6.Tube mills.
 Diameter x width x bore x toothnumber x angle
| 60 x 5 x 16 x 24 x 88° |
| 60 x 5.2 x 16 x 28 x 90° |
| 75 x 5.6 x 18 x 28 x 90° |
| 75 x 6.4 x 18 x 32 x 92° |
| 80 x 7 x 19 x 32 x 92° |
| 80 x 7.4 x 19 x 36 x 94° |
| 90 x 7.4 x 20 x 40 x 95° |
| 90 x 8 x 20 x 40 x 95° |
| 100 x 8.5 x 22 x 40 x 95° |
| 100 x 9 x 22 x 48x 96° |
| External diameter | Tooth width | Bore | No. of teeth | Angle |
| 60 | 5 | 16 | 24 |  88° |
| 60 | 5.2 | 16 | 28 |  90° |
| 75 | 5.6 | 18 | 28 |  90° |
| 75 | 6.4 | 18 | 32 |  92° |
| 80 | 7 | 19 | 32 |  92° |
| 80 | 7.4 | 19 | 36 |  94° |
| 90 | 8 | 20 | 40 |  94° |
| 90 | 8.5 | 20 | 40 |  95° |
| 100 | 8.5 | 22 | 48 |  95° |
| 100 | 9 | 22 | 48 |  96° |
Circular shearing blade is made of T10,6CrW2Si,Cr12MoV,Ld,H13,etc good quality too steel and high alloy steel,with smooth sheaing edge,dlade is sharp and durable.
Blade most used in sheet metal slitting and shearing,Maximum diameter we can manufacture is 1.2 meter.
Blade manufactured is with high precision and parallelism by 0.002mm.
Application field.
1.Steel mills
2.Cold rolled mills.
3.packing material factory.
4.Shearing machine manufacturer.
5.Steel strpl mills.
6.Tube mills.
Â
Tower Crane Telescoping Hydraulic System is the important system used for Tower Crane Mast Section telescoping. It includes the Telescoping Cage, Telescoping Yoke , cylinder, and Hydraulic Pump Station.
The main components of hydraulic system of Tower Crane are hydraulic cylinder, control element, oil pipe and pipe joint, oil tank and hydraulic oil filter, etc.
The hydraulic pump and the hydraulic motor are the most complex parts of the hydraulic system.
The hydraulic pump inhales the oil and transpotrs it through pipes to the hydraulic cylinder or the hydraulic motor, so that the cylinder or the motor can operate normally.
Tower Crane Telescoping Hydraulic System
Hydraulic Pump Station,Telescoping Cage,Telescoping Yoke,Tower Crane Cylinder
SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.bq-cranes.com