Waste bituminous mixture thermal regeneration technology and equipment project was funded by Innovation Fund of Ministry of Science and Technology
As an innovative high-tech enterprise integrating R&D, manufacturing, sales and service of asphalt mixing equipment and asphalt recycling equipment, Fujian Tietuo Machinery Co., Ltd. has successfully developed more than 40 series of 13 series after more than five years of hard work. Various models of high-tech products have successively undertaken many national, provincial, municipal, and regional science and technology projects. Recently, its "Abandoned Asphalt Mixtures Thermal Recycling Technology and Equipment" project was approved by the Ministry of Science and Technology for the SME Innovation Fund project in 2009.
The machine integrates machine, electricity and gas. It adopts drum-type pure hot air for heating. Roller blade adopts anchor chain connection and flexible blade to prevent sticking and processing. The heat exchange rate is high, and the double-shaft shaft forced mixer and regeneration equipment are used. The indirect heating of the burner, intermittent heating, and the hot exhaust gas generated during the heating are used for the secondary combustion of the cycle so that the hot bitumen recovery material can fully and uniformly mix with the regenerant, and the old asphalt in the mixture can be activated to the maximum extent so that After regeneration, the performance can meet the road performance and use it to re-paving the road to achieve recycling of waste asphalt pavement materials. The use of this equipment for the recycling of bituminous waste materials can not only solve the three major negative impacts of large amounts of waste asphalt mixture on the environment, occupying land, polluting the environment and wasting large amounts of non-renewable resources, but also save a large amount of new asphalt mixture. The strategic goal of achieving sustainable development of resources. The equipment of this project is characterized by compact product structure, quick installation, good regenerative quality, stable and reliable performance, high degree of automation, low energy consumption, and compliance with environmental protection requirements. Products have been widely put on the market, has been the majority of users of the same recognition and praise.
The machine integrates machine, electricity and gas. It adopts drum-type pure hot air for heating. Roller blade adopts anchor chain connection and flexible blade to prevent sticking and processing. The heat exchange rate is high, and the double-shaft shaft forced mixer and regeneration equipment are used. The indirect heating of the burner, intermittent heating, and the hot exhaust gas generated during the heating are used for the secondary combustion of the cycle so that the hot bitumen recovery material can fully and uniformly mix with the regenerant, and the old asphalt in the mixture can be activated to the maximum extent so that After regeneration, the performance can meet the road performance and use it to re-paving the road to achieve recycling of waste asphalt pavement materials. The use of this equipment for the recycling of bituminous waste materials can not only solve the three major negative impacts of large amounts of waste asphalt mixture on the environment, occupying land, polluting the environment and wasting large amounts of non-renewable resources, but also save a large amount of new asphalt mixture. The strategic goal of achieving sustainable development of resources. The equipment of this project is characterized by compact product structure, quick installation, good regenerative quality, stable and reliable performance, high degree of automation, low energy consumption, and compliance with environmental protection requirements. Products have been widely put on the market, has been the majority of users of the same recognition and praise.
Reducing Tee: branch pipe outside diameter is different with main pipe outside diameters. forming process:Hydroforming, hot pressing, cold forming,According to Pressure and thickness: Sch5s, Sch10s, Sch10, Sch20, Sch30, Sch40s, STD, Sch40, Sch60, Sch80s, XS,Sch100,Sch120,Sch160,XXS;
| Product Name:Reducing Tee |
| Size:DN10-DN2500 |
| Materials: A234 WBP-WP1-WP12-WP11, A403 WP 304-304L-316-316L, A402 WPL3-WPL 6,A860 WPHY 42-46-52-60-65-70,PG370,C20 |
| Thickness: 2mm-100mm |
| Standard:GB/ANSI/ GOST/ JIS/ DIN |
| Crafts: Cold extrusion, Thermoforming |
| Connection: Welding |
| Package: Wooden boxes,Wooden pallets,According to customer requirements. |
| Brand Name: HY |
| Place of Origin: China (Mainland) |
| Certification: ISO.UKS.SGS.BV |
| Application: Chemical, Water, Oil and gas, Electricity |
Reducing Tee
Reducing Tee,Tee Reducing,Stainless Steel Pipe Fittings ,Steel Reducing Tee
CANGZHOU HAOYUAN PIPE FITTINGS MFG CO.,LTD , https://www.pipefitting-china.com