| Model | Maximum working  pressure |
Capacity FAD |
Installed motor power |
Noise | Dimensions (mm) |
Weight | Air outlet  pipe diameter |
|||||
| bar(e) | psig | m³/min | cfm | kW | hp | dB(A) | L*W*H | kg | ||||
| DWW-45A/W | 7 | 102 | 8.11 | 286.4 | 45 | 60 | 67 | A:2000×1200×1650 W:2300×1500×1720 |
2600 | 1-1/2" | ||
| 8 | 116 | 7.12 | 251.4 | 45 | 60 | 69 | ||||||
| 10 | 145 | 6.38 | 225.3 | 45 | 60 | 71 | ||||||
| DWW-55A/W | 7 | 102 | 10.21 | 360.5 | 55 | 75 | 68 | A:2000×1200×1650 W:2300×1500×1720 |
2800 | 1-1/2" | ||
| 8 | 116 | 8.84 | 312.1 | 55 | 75 | 69 | ||||||
| 10 | 145 | 8.12 | 286.7 | 55 | 75 | 71 | ||||||
| DWW-75A/W | 7 | 102 | 12.91 | 455.9 | 75 | 100 | 69 | A:2200×1400×2000 W:2300×1500×1720 |
2800 | DN50 | ||
| 8 | 116 | 12.83 | 453 | 75 | 100 | 71 | ||||||
| 10 | 145 | 11.57 | 408.5 | 75 | 100 | 72 | ||||||
| DWW-90A/W | 7 | 102 | 13.65 | 482 | 90 | 120 | 66 | A:2800×1700×2150 W:2300×1500×1720 |
3400 | DN65 | ||
| 8 | 116 | 13.63 | 481.3 | 90 | 120 | 67 | ||||||
| 10 | 145 | 13.58 | 479.5 | 90 | 120 | 69 | ||||||
| DWW-110A/W | 7 | 102 | 20.44 | 721.7 | 110 | 150 | 67 | A:2800×1700×2150 W:2700×1800×1800 |
3400 | DN65 | ||
| 8 | 116 | 19.95 | 704.4 | 110 | 150 | 68 | ||||||
| 10 | 145 | 19 | 670.9 | 110 | 150 | 70 | ||||||
| DWW-132A/W | 7 | 102 | 24.55 | 866.9 | 132 | 175 | 69 | A:2800×1700×2150 W:2700×1800×1800 |
3450 | DN65 | ||
| 8 | 116 | 23.13 | 816.7 | 132 | 175 | 70 | ||||||
| 10 | 145 | 20.44 | 721.7 | 132 | 175 | 71 | ||||||
| DWW-160A/W | 7 | 102 | 28.79 | 1016.6 | 160 | 215 | 69 | A:2800×1700×2150 W:2700×1800×1800 |
3550 | DN65 | ||
| 8 | 116 | 27.11 | 957.3 | 160 | 215 | 71 | ||||||
| 10 | 145 | 24.49 | 864.7 | 160 | 215 | 71 | ||||||
| DWW-180A/W | 7 | 102 | 31.05 | 1096.4 | 185 | 250 | 69 | A:2800×1700×2150 W:2700×1800×1800 |
3950 | DN65 | ||
| 8 | 116 | 31.01 | 1095 | 185 | 250 | 71 | ||||||
| 10 | 145 | 28.72 | 1014.1 | 185 | 250 | 71 | ||||||
| DWW-200W | 7 | 102 | 37.14 | 1311.4 | 200 | 270 | 69 | W:3100×2100×2060 | 4500 | DN100 | ||
| 8 | 116 | 36.95 | 1305 | 200 | 270 | 70 | ||||||
| 10 | 145 | 31.13 | 1099.2 | 200 | 270 | 72 | ||||||
| DWW-220W | 7 | 102 | 41.13 | 1452.3 | 220 | 300 | 70 | W:3100×2100×2060 | 5000 | DN100 | ||
| 8 | 116 | 41.09 | 1450.9 | 220 | 300 | 71 | ||||||
| 10 | 145 | 34.47 | 1217.1 | 220 | 300 | 72 | ||||||
| DWW-250W | 7 | 102 | 46.99 | 1659.2 | 250 | 350 | 70 | W:3100×2100×2060 | 5200 | DN100 | ||
| 8 | 116 | 44 | 1553.6 | 250 | 350 | 72 | ||||||
| 10 | 145 | 41 | 1447.7 | 250 | 350 | 72 | ||||||
Casting is a manufacturing process in which a liquid material is usually poured into a mold, which contains a hollow cavity of the desired shape, and then allowed to solidify. The solidified part is also known as a casting, which is ejected or broken out of the mold to complete the process. Casting materials are usually metals or various cold setting materials that cure after mixing two or more components together; examples are epoxy, concrete, plaster and clay. Casting is most often used for making complex shapes that would be otherwise difficult or uneconomical to make by other methods.
Sand Casting method (Sand Casting)
Using Sand as Mold material, according to the different components of Sand can be subdivided into wet Sand casting method of Green Sand Mold), surface Dry Sand casting method (Dry Sand Mold), and so on, but not all are available in the casting.
Advantage is lower cost, because the sand mold use reusable;
We can supply big range of such sand Casting Parts.
B. Main particulars
|
|
MAIN PARTICULARS |
|
Material for product |
carbon steel, alloy steel, stainless steel, aluminum alloy, zinc alloy, brass, gray iron, nodular cast iron, ductile Iron or other specified |
|
Standard |
ASTM, ASME, DIN, JIS, ISO, BS, API, EN |
|
Certificate |
ISO9001 |
|
Dimension |
As per drawing, as large as we can |
|
Processing |
Step1:sand casting Step2:turning, milling, drilling, grinding, threading, CNC Machining, boring |
|
Finishing surface |
Machined surface with oil, blasting and painting, anodize, polishing, powder painting, electrophoretic coating- |
|
Marking |
as per clients` requirements |
|
Inspection |
material, construction, dimension, heat treatment, hardness, NDT |
|
Quality |
ISO9001, PPAP control production |
|
Lead time |
20-30 days for sample, consult with customer for mass production |
|
Delivery |
Express for sample, ocean shipping/air for mass production |
|
Our Capabilities |
CNC machining, CNC center machining, drilling, milling, turning, grinding, tapping, boring |
|
Engineering & manufacturing services |
R&D process, tooling and gauging design, product design Integrated CAD/CAM system, test and measuring |
|
Others |
Recyclable, in line with environmental requirements and standards, and reliable |
C. Construction
Construction by sand casting
D Workmanship
The workmanship have good production practice. Care are taken to ensure High accuracy and smooth surfaces
E. Certificates
- Material certificates
- Measuring reports
- Inspection protocol
- NDT reports
- Fixed certificate: ISO9001 certificate
Our service
Besides above the general specifications, we can also supply some specific machining parts as clients' requirements.
Package and shipping
Export cartons, pallets, wooden cases, Polybags
Sand Casting Parts,Oem Sand Casting Parts,Stainless Steel Sand Casting,Aluminum Sand Casting Parts
Shinvast Industry Ltd , https://www.shinvastindustry.com