Hook Lift Bin Waste Container Roll on off Container
Company information:
We're one professional manufacturer which refitting special truck and trailer in China, established in 1969, more than 40 yrs producing experience, a growing enterprise with endless innovations and development. Our corporation mainly specializes in the various semi trailers and special vehicle related business, such as dump truck, tanker trailer, concrete mixer truck, and etc. Also, our business line ranges from the research, development, and design to the manufacture and sales for other automobile accessories, especially for axles and hydraulic cylinders. We're one of the earliest company to get the approval of the ISO, CCC and Compulsory Product Certification Enterprises. We have exported more than 30 countries from 2005.Looking forward to your visiting or calling.
We keep good relations with main truck manufactrers in China. And we can supply all brands dump truck made in China. HOWO, SHACMAN, BEIBEN, DONGFENG, SINOTRUK, BEIBEN, FOTON, C&C, and so on. More details for these trucks, feel free to contact us please.
Hook Arm Truck Main Specifications:
Truck Model |
ZZ1257N3647B, Left hand drive/Right Hand Drive model |
|
Truck Brand |
SINOTRUKÂ -HOWO |
|
Dimension(Lx W xH) |
8145x2496x3386 |
|
Cargo body size (L*W*H, mm) |
5400x2300x1400 |
|
Container thickness(mm) |
bottom:8mm, side:4mm |
|
Approaching angle/Departure angle(°) |
19/26 |
|
Overhang(front/rear)Â (mm) |
1500/1739 |
|
Wheel base (mm) |
3625+1350 |
|
Max speed(km/h) |
75 Â Â |
|
Curb weight(kg) |
11290Â Â Â Â Â Â Â Â Â Â Â Â |
|
Loading Weight(kg) |
25000 |
|
Fuel Tanker |
300L with locking fuel cap |
|
Fuel consumption(L/100km) |
32 |
|
Clutch |
Single-plate dry clutch Φ430mm |
|
Engine |
Model |
WD615.62,4- stroke direct injection diesel engine, 6 cylinders in line with water cooling , |
Horse Power, |
266HP |
|
Emission Standard |
EUROÂ II |
|
Transmission |
Model |
HW 19710,10 forwards and 2 reverse |
Brake system |
Service brake |
Dual circuit compressed air brake |
Parking brake |
spring energy, compressed air operating on rear wheels |
|
Auxiliary brake |
Engine exhaust brake |
|
Steering system |
Model |
ZF8098/ZF8118 hydraulic steering with power assistance |
Front axle |
HF9Â |
|
Rear axle |
HC16 |
|
Tire |
12.00R20 |
|
Electrical system |
Operating voltage |
24V,negative grounded |
Starter |
24V,7.35KW |
|
Alternator |
28V,1500W |
|
Batteries |
2*12V.165Ah |
|
**The products are mainly used for transfer of level direct pressure transfer station or integral rubbish compress box, also can be connected with other garbage boxes for transferring.Â
Standard in-cab manual controls which allow for precise metering of the manual hydraulic valve.
**Patented dump/load interface
Hydraulic locks to prevent cylinder movement in case of pressure loss
Mechanical rear body tie-down latchesÂ
**Resettable dump/tilt tabs
Hydraulic rotary valve to prevent front tilt movement when the dump frame is raisedÂ
**Full length dump frame with front saddles to support the body during the dump mode
**Grease zerks at all pin points to allow purging of contaminatesÂ
**Greaseable load rollers
Stainless steel pins used throughout
Two-part polyurethane enamel
The followed parameters is for small garbage truck.
| Item | Unit | Parameter | |
| Vehicle model | HTC5073ZXXB4 | ||
| Chassis model | CA1073 | ||
| Overall dimensions | mm | 5050,4800,4600×1880×2280,2180 | |
| Gross weight | kg | 4495 | |
| Curb weight | 2300 | ||
| Payload capacity | 2000,2065 | ||
| Axle load | 1700/2795 | ||
| Wheelbase | mm | 3050,2850,2800,2600 | |
| Front/Rear track base | 1415,1510/1435 | ||
| Front/Rear overhang | 1100/900,1100/850 | ||
| Approach/Departure angle | ° | 23/28,23/27 | |
| Exhaust/Power | ml/hp | 2545/95 | |
| Max speed | km/h | 95 | |
| Emission standard | Euro 2,3,4,5 | ||
| Engine model | CA498E3-12, CUMMINS ISF3141.38 | Electric system | 24V |
| Traction system | 4×2 | Number of axles | 2 |
| Tire specifications | 7.50-15,7.50R15,7.00-16,7.00R16 | Number of tires | 6 |
| Operation control  system | Electrically hydraulic control | Allowable passengers in cab | 3, 2 |
| Engine manufacturer | FAW | ||
| Production cycle | 15-25 working days | ||
| warranty | 12 month, from the date of supply | ||
Hairpin Bender is main equipment for fin tubing coil fabrication, the funciton of this machine is to make hairpin from 200mm to 4000mm. We have three different construction hairpin bender machine, First is Automatic hairpin bender( Servo Hairpin Bender ), Second is Semi-automatic hairpin bender(Semi-auto Hairpin Bender) or Hand feeding Hairpin Bender and the last is Manual Hairpin Bender. Three Hairpin Benders has differenct application due to prduction
Hairpin Bender
Hairpin Bender, Automatic hairpin bender, Hand feeding Hairpin Bender, Manual Hairpin Bender,Servo Hairpin Bender, Semi-auto Hairpin Bender
Satis Products Co., Ltd. , https://www.satismachinery.com