C/Z type roll forming machin





(1)The main technical parameter
1.Rolling product specification:width 100mm~300mm,high 40mm~80mm,thickness2.0mm~3.0mm
2.The speed of rolling:12-15 m/min
3.Number of sets of molding:17 sets main roller
4.Number of sets of leveling: 7 sets leveling roller
5.Transform line:2 sets
6.Installation form:Adopt arch type
7.Roller type: use split type
8.Roll material: GCr15 quenching treatment, HRC58-62
9.Spindle material: 45 quality steel quenched and tempered
10.main motor power:15KW
11.Hydraulic station motor power:7.5KW
12.Change the specifications speed: a full set of 10 minutes
13.The method of Cutting and punching:After forming then punching and finally cutting
14.The material of cutting knife and punching mold:Cr12 quenching treatment.
15.Electronic control system:The whole machine use  industrial computer PLC Siemens frequency conversion to control.
16.Main machine size:length 11m×width 2.3m×high 1.6m (including main motor)
17.Total weight of equipment:Around 12000kg
(2)Composition of equipment:
1.Guide
To prevent the plate move in production process to keep the product quality.
2.leveling machine
The leveling machine is compose of plate material guiding device,guide plate driving roller, adjustable guide device on both sides, leveling roller and etc.
The leveling machine have a separate motor drive and the speed is slower than main drive motor. In the head of the reducer shaft installed overrunning clutch.Firstly the  motor drive feeding material,then workpieces into main drive roller, and due to the effect of the overrunning clutch, the front drive motor is in a passive state.
Due to the main diver motor's speed is faster than front drive motor,when plate material cutting down,between the workpieces will have a distance.
When a batch of workpieces are finish, the steel coil needs to be remove,and the front drive motor will be stop.When all the finish workpieces are completely out of the roll forming machine, the front drive motor will inverse motion and  exit the steel coil.
3.Hydraulic punching device: 
structure type:Hydraulic punching device rack is use gantry type. The power source is the pressure of under oil cylinder:The hole position is longitudinally fixed and can be adjusted transversely.
 Main parameter:

• Maximum punching plate thickness:3mm
• The horizontal adjustment range of punching hole distance :45~500mm

4.Hydraulic cutting device: 
Function:After input the length parameter of workpiece through PLC,the encoder will counting length and when the workpiece length is enough the hydraulic cutting machine will cut down the workpiece.
Main parameter:

1. Maximum cutting plate thickness:3mm
2. Effective cutting width of workpiece:650mm

5.Roll forming machine capable of quickly changing type:
The roll forming machine is compose of drive motor, frame, forming roller,Manual regulating workpieces specifications device.

1. forming roller driving motor using 15kw hardened gears reducer ,frequency control and encoder control brake.
2. The frame uses the channel steel as the main beam,and the middle is welded by the stiffener plate.
3. The forming roller is use the method of two sides formed and the form of middle cut off. The forming roller through the motor driven sliding screw rod to adjust the workpieces specifications. Between the two sliding screw rod use the bevel gear to drive and made them to achieve complete synchronization also with self-locking function. The thickness of the steel plate is adjusted by adjusting the eccentricity distance of the passive roller.

 
(3)Equipment production process
(1)The main technical parameter
1.Rolling product specification:width 100~300mm,high 40~80mm,thickness2.0~3.0mm
2.The speed of rolling:12-15 m/min
3.Number of sets of molding:17 sets main roller
4.Number of sets of leveling: 7 sets leveling roller
5.Transform line:2 sets
6.Installation form:Adopt arch type
7.Roller type: use split type
8.Roll material: GCr15 quenching treatment, HRC58-62
9.Spindle material: 45 quality steel quenched and tempered
10.main motor power:15KW
11.Hydraulic station motor power:7.5KW
12.Change the specifications speed: a full set of 10 minutes
13.The method of Cutting and punching:After forming then punching and finally cutting
14.The material of cutting knife and punching mold:Cr12 quenching treatment.
15.Electronic control system:The whole machine use  industrial computer PLC Siemens frequency conversion to control.
16.Main machine size:length 11m×width 2.3m×high 1.6m (including main motor)
17.Total weight of equipment:Around 12000kg
(2)Composition of equipment:
1.Guide
To prevent the plate move in production process to keep the product quality.

1. leveling machine

The leveling machine is compose of plate material guiding device,guide plate driving roller, adjustable guide device on both sides, leveling roller and etc.
The leveling machine have a separate motor drive and the speed is slower than main drive motor. In the head of the reducer shaft installed overrunning clutch.Firstly the  motor drive feeding material,then workpieces into main drive roller, and due to the effect of the overrunning clutch, the front drive motor is in a passive state.
Due to the main diver motor's speed is faster than front drive motor,when plate material cutting down,between the workpieces will have a distance.
When a batch of workpieces are finish, the steel coil needs to be remove,and the front drive motor will be stop.When all the finish workpieces are completely out of the roll forming machine, the front drive motor will inverse motion and  exit the steel coil.
3,Hydraulic punching device: 
structure type:Hydraulic punching device rack is use gantry type. The power source is the pressure of under oil cylinder:The hole position is longitudinally fixed and can be adjusted transversely.
Main parameter:

• Maximum punching plate thickness:3mm
• The horizontal adjustment range of punching hole distance :45~500mm

1. Hydraulic cutting device: 

Function:After input the length parameter of workpiece through PLC,the encoder will counting length and when the workpiece length is enough the hydraulic cutting machine will cut down the workpiece.
Main parameter:

1. Maximum cutting plate thickness:3mm
2. Effective cutting width of workpiece:650mm

• Roll forming machine capable of quickly changing type:

The roll forming machine is compose of drive motor, frame, forming roller,Manual regulating workpieces specifications device.

1. forming roller driving motor using 15kw hardened gears reducer ,frequency control and encoder control brake.
2. The frame uses the channel steel as the main beam,and the middle is welded by the stiffener plate.
3. The forming roller is use the method of two sides formed and the form of middle cut off. The forming roller through the motor driven sliding screw rod to adjust the workpieces specifications. Between the two sliding screw rod use the bevel gear to drive and made them to achieve complete synchronization also with self-locking function. The thickness of the steel plate is adjusted by adjusting the eccentricity distance of the passive roller.

 
(3)Equipment production process
feeding  -  guiding  -   leveling -     punching -     cutting  - forming -  tropsch feed


FAQ
1)Q:Can you make machine according to my design?
   A:Yes, we have experienced technical team to work out the suitable design for you and confirm with you until you agree.
2) Q: Will you deliver the right goods as ordered? How can I trust you?
    A: Yes, we will. The core of our company culture is honesty and credit.
3)Q:What payment terms you accept?
    A:Commonly is TT, 30% deposit and 70% before shipment, and sometimes we can consider more for you as per your request.
4) Q:What is the warranty for our machine?
    A:We have one year guarantee, and provide whole life's technical support.

Schindler 9500-35 - optimal price/performance

Versatility on demand
Schindler 9500 moving walks share the design versatility of Schindler escalators. There is a wide choice of materials, finishes, colors, sizes, lighting and other options that can be combined to produce customized solutions. It can accommodate transportation lengths up to 100 meters.

• Inclination from 0° to 3°
• Pallet widths of 800 mm and 1000 mm
• Balustrade heights of 900 mm and 1000 mm
• Balustrade panels available in multiple color options, brushed stainless sandwich panels, or powder coated sheet steel
• Two balustrade design variants
• Balustrade profiles and deckings in stainless steel or powder-coated aluminum
• Cladding available in stainless steel or painted sheet steel
• A choice of stainless steel or ribbed aluminum floor covers
• Various lighting options, including balustrade and skirt lighting
• Can be installed indoors and outdoors, covered.
  

Schindler 9500-45 - plenty of space to maneuver

The high-performance moving walk for long distances
With the maximum pallet width of 1400 mm it is possible to accommodate as many as 16,000 passengers per hour. Schindler 9500-45 is able to cover high transport volumes and transportation lengths of up to 150 meters.

Flat construction
The flat construction of Schindler 9500-45, which has no truss and is only 400 mm high in its central part, is a great advantage when space is at a premium.

Long service life
The extremely stable pallets, with a depth of 400 mm, and the durable connection elements are built to withstand even the most punishing use. The robust stainless steel balustrade and the solid, steel-reinforced newel end are virtually resistant to damage caused by carelessness or vandalism.

Schindler 9500 10/15 - inclined moving walk

Especially developed for shopping malls, Schindler 9500 10-15 inclined moving walks provide quiet, comfortable transportation from floor to floor, even with a fully loaded shopping cart. Schindler products never compromise quality, assuring dependable performance and passenger safety. Streamlined and flexible in design, these units leave plenty of room for architectural expression, indoors or out.

Streamlined construction
No moving walk on the market is more compact than the Schindler 9500/10-15.

• Incline ranging from 10° to 12°
• Short installed lengths
• Ideal for covering short distances
  
• 10° flat combs at both ends allow shopping carts to roll on and off easily
• Ideal for outside use
  
• Pallets are guided beneath the skirt for maximum user safety
•  Cambered pallet surface delivers excellent grip when damp or wet.
  

Small installation dimensions
Patented short pallets with a depth of only 133 mm greatly reduce the transition curves. As a result, these moving walks require minimum installation space.

Schindler Moving Walk Spare Parts

Schindler Moving Walk Spare Parts,Schindler Travelator Spare Parts ,Schindler Moving Sidewalk Spare Parts

CEP Elevator Products ( China ) Co., Ltd. , https://www.china-elevators.com