-
Model NO.: 5.00S-12 4.00E-9 5.00F-10
-
Type: Rim
-
Wheel Hub Diameter: <16"
-
Wheel Accessories: Hub Ring
-
Ceitificates: DOT, CCC, ISO9001, etc.
-
Place of Origine: Shandong, China
-
Application: Folklift
-
Specification: 4.00-9
-
HS Code: 87087040
-
Material: Alloy
-
Drive Wheel: 4WD
-
Finishing: Black
-
Certification: ISO
-
Business Type: Manufacturer
-
4.00e-9: Divided Steel Wheel
-
Trademark: ROLLING STONE
-
Origin: China
Forklift rim, wheel rim, rim
Application: Folklift
Size: 4.00E-9
Type: Divided Steel Wheel
Bolt Holes: 5
PCD: 115
CBD: 80
Offset/ Et: 0
Disc thickness: 4mm
We are Trading Company
QINGDAO EASTAR TYRE Co., Ltd is a main operating tire producyion and processing enterprises, mainly engaged in forklift solid tires, forklift pneumatic tire, skid steer loaders solidtires, skid steer loader tires, and OTR tires.
We are perfessional on tire designing, developing, manufacturing, and exporting.
Our elite exporting team provides professional tyres and application instructions for you! We have rich experience on tire selling and shipping, that could save you lots of cost on time and taxes.
We are Manufacturer
Our own factory are DONGYING SENTAI RUBBER Co., Ltd. And SHANDONG LUYAO RUBBER Co., Ltd. ---the perfessional manufacturer of all kinds of tires, include agricultural tractor tires, bias truck tires, industrial forklift tires, OTR tires, etc. We also export radial truck tires, car tires.
We are one of the leading tyre manufactuers in China with our own brands: "ROLLING STONE"and"WINCTOR".
How to use the tyres correctly
"Pressure is the tyre's life, " a direct impact pressure is normal to tyre life, so in order to reduce operating costs and the performance of the tyre can give full play, in the inflated tyre must pay attention to the following:
(1) driving car trains will have to wait after the tyres heat plus gas, because traffic will increase when the tyre temperature, and pressure impact.
(2) to check the valves. When combined with valves and valve core is not flat, there is the phenomenon of protruding recessed and other defects are not easy to inflate and the amount of air pressure.
(3) inflatable should pay attention to cleanliness. The air filled with water and oil can not prevent the deterioration of rubber inner tube damage.
(4) inflation should not exceed the standards too much, and do not travel abroad because of the long-term inflation and too much can not be inflated. Due to excessive over-done too much will lead to cord, causing the strong decrease of tyre life.
(5) inflatable operation carefully. Inflatable lips before the dust should be wiped off the valve, do not loose valve core. After the application of pneumatic valve lather wipe the mouth, check for leaks. If the leak will have a row of small bubbles. The valve cap will be tightened to prevent sediment entering the internal valve
(6) measured the air pressure inside the tyre must use a standard barometer to test, not just by the eye view, percussion and other experience to judge.
(7) air compressor gauge on the pressure does not show the actual pressure with the same tyre.
(8) even in the case of overloading operation, can not indefinitely increase the tyre pressure. By comparison of the data and the actual results to 12.00R20-18 specifications, for example, even in the case of severe overloading of 12 inflatable pressure is sufficient to play more, can only increase the chance of a puncture.
| Wheel Size |
Marked Width |
Marked Size |
   C. B. D(mm) |
 Bolt |
Assembly Hole |
Thickness (mm) |
Equipped with Tyre |
| No. of Holes |
Dia. (mm)Â |
P. C. D. (mm) |
No. of Holes |
Dia. (mm)Â |
P. C. D. (mm) |
| 3.00D-8 |
76 |
202.4 |
106 |
6 |
14.5 |
148 |
6 |
10.5 |
156 |
4 |
4.00-8 |
| 3.00D-8 |
76 |
202.4 |
100 |
6 |
15 |
125 |
6 |
13 |
150 |
5 |
4.00-8 |
| 3.00D-8 |
76 |
202.4 |
110 |
6 |
14.5 |
148 |
6 |
11 |
165 |
5 |
5.00-8 |
| 3.50D-8 |
89 |
202.4 |
100 |
6 |
15 |
125 |
6 |
12 |
160 |
5 |
5.00-8 |
| 3.50W-9 |
90 |
230 |
130 |
6 |
16.8 |
166 |
6 |
12.5 |
166 |
6 |
|
| 3.70R-9 |
94 |
228 |
140 |
6 |
17 |
175 |
6 |
15 |
175 |
5 |
|
| 4.00E-9 |
101.5 |
227.8 |
130 |
8 |
16 |
160 |
8 |
13 |
185 |
5 |
6.00-9 |
| 4.00E-9 |
101.5 |
227.8 |
140 |
6 |
17 |
170 |
6 |
13 |
170 |
5 |
6.00-9 |
| 4.00E-9 |
101.5 |
227.8 |
140 |
6 |
18 |
170 |
6 |
17 |
170 |
5 |
6.00-9 |
| 4.00E-9 |
101.5 |
227.8 |
150 |
6 |
17.5 |
180 |
6 |
13 |
180 |
5 |
6.00-9 |
| 4.33R-8 |
110 |
204.4 |
128 |
6 |
13.2 |
148 |
|
|
|
4 |
18*7-8 |
| 4.33R-9 |
110 |
227.8 |
105 |
6 |
16.5 |
145 |
6 |
14.5 |
170 |
4 |
7.00-9 |
| 4.33R-9 |
110 |
227.8 |
105 |
6 |
16.5 |
145 |
6 |
15.5 |
170 |
5 |
7.00-9 |
| 4.50E-12 |
114 |
304 |
135 |
4 |
17 |
170 |
9 |
11 |
245 |
3 |
5.50-12 |
| 5.00S-9 |
127 |
232.6 |
140 |
6 |
16.5 |
170 |
6 |
13 |
170 |
5 |
7.00-9 |
| 5.00S-12 |
127 |
308.8 |
150 |
6 |
14.5 |
180 |
6 |
15.5 |
245 |
5 |
7.00-12 |
| 5.00F-10 |
127 |
253.2 |
130 |
8 |
16 |
160 |
8 |
13 |
185 |
5 |
6.5-10 |
| 5.00F-10 |
127 |
253.4 |
150 |
6 |
17.5 |
180 |
6 |
13 |
180 |
5 |
6.5-10 |
| 5.00F-10 |
127 |
253.2 |
150 |
6 |
17.5 |
180 |
6 |
13 |
196 |
 5/6 |
6.5-10 |
| 5.00S-12 |
127 |
308.8 |
170 |
6 |
32 |
220 |
6 |
17 |
240 |
6 |
7.00-12 |
| 5.00S-12 |
127 |
308.8 |
151 |
6 |
32 |
200 |
6 |
17 |
220 |
6 |
7.00-12 |
| 5.00S-12 |
127 |
308.8 |
150 |
6 |
27 |
200 |
6 |
17 |
240 |
6 |
8.25-12 |
| 5.00S-12 |
127 |
308.8 |
158 |
5 |
32 |
210 |
5 |
15 |
210 |
6 |
|
| 5.00S-12 |
127 |
308.8 |
170 |
6 |
27 |
220 |
6 |
17 |
240 |
6 |
|
| 5.00E-12 |
127 |
304 |
135 |
4 |
17 |
170 |
|
|
|
|
|
Planetary Reducer Hybrid Stepper Motor
42 Stepper Motor,Brushless Dc Motor,2 Phase Stepper Motor,Planetary Stepper Motor
Changzhou Hebe Interantional Trade Co., Ltd , https://www.hebe-motion.com