Fire-fighting water is not metered in the pot for temporary water withdrawal costs?

In the era of scarcity of water resources, it should be said that the water that cannot be “save” at all should be water for fire fighting, but “abuse” should still be stopped. Recently, it was learned from the local government of Jinhua, Zhejiang that the municipal water company installed a metering meter on a hydrant to manage temporary water intake. The current installed capacity has reached more than 10.

Fire water is supplied by the water supply network, natural water supply, or fire fighting pool. However, due to the large amount of fire fighting water, non-municipal water supply is the first choice to meet the two requirements of simultaneously saving resources and ensuring the reliability of fire-fighting water sources. The water company is responsible for measurement and management. Because of the abundant water resources, the phenomenon of “borrowing” fire water, such as greening and construction, often occurs during the urban construction process. This is a manifestation of the rational use of resources, but it is also controversial. Firefighting water is mainly used for firefighting, and there is no measurement charge. Once applied in urban construction work, it is necessary to collect fees to make up for the loss of the water company.

Jinhua Water Supply Company has taken a good solution to this situation and is worth learning from other regions. The water supply company discriminates against temporary water intake. For municipal, sanitation and other units that need to collect water all year round, the company installs a buried water meter, which is periodically settled through measurement; some temporary water withdrawals are used for road construction, greening conservation, power operations, etc. In the unit, the company installed a temporary water meter on the hydrant, measured it on demand, and reasonably calculated the cost of water. In this way, to ensure that water charges can be charged on time, water companies do not have to “lose money”, and water users will not complain.

Fire hydrant temporary water take-off phenomenon has appeared everywhere. Earlier, it was precisely because the intermediate measurement work was not handled properly. An unexpected situation occurred in Zhongwei City, Ningxia. When the Municipal Water Supply Company was unable to collect the fire water and water fees payable by the property management department due to the lack of accurate measurement data and water usage information, it was arbitrarily decommissioning fire water from the area, resulting in more than 180 pedestrian street bars, cafes, and billiard halls. Indoor fire hydrants at public places of entertainment are all "squeaked" and cannot be supplied normally. In other words, 180 shops are grouped together but all have fire hazards. In case of a fire in any of them, the consequences would be unthinkable. Fortunately, the fire brigade discovered in a timely manner the fire hazard investigation and rectification activities to avoid more losses, if it is only when the fire really occurs, it will cause irreparable consequences.

The "best retrograde person" in the major explosion accident last year made Xiaobian distressed. The water in the fire hydrant is the "rescue water" used in the fire. However, sufficient water supply guarantees give the criminals an opportunity to "steal". The phenomenon of "water" has continued beyond prohibition. Unauthorized fire hydrants not only cause waste of water resources, but may also lead to equipment damage and failure to use properly. Related departments need to take drastic measures to combat this behavior. At the same time, Xiao Bian also hopes to establish reasonable and complete measurement and management measures in the same way as Jinhua City during the temporary water intake in urban construction so that problems can be properly handled.

Ductile Iron Spindle Assembly

Ductile Spindle Assembly is a crucial part for your lawn mower cutting deck that work together with the pulleys and belts to perform clean and even mowing.

It is combined from bearings, spindle housings, spindles, tubes, dust cap, screw nuts, etc.

Which kind of spindle assembly does QFQP produce?

We produce various kinds of spindle assembly, especial for riding mower (with aluminum/ductile iron housings). All parts assembled by our experienced workers.

Where are the products sold?

Main of our customers is from USA, CANADA.

Why choose QFAP?

We have specialized in producing high precision mechanical parts more than 10years, got 6years experience on mower deck spindle assembly.

All of our cooperators are large mower companies or agricultural equipment companies, such as Badboy Mowers, Wood-Mizer, Caterpillar, etc.

Because of the long term cooperation, we could supply our customers not only the products but also our recommendation on the designs to saving costs.

Ductile Iron Spindle Assembly,Cast Iron Spindle Assembly,Scag Spindle Bearing Replacement,Scag Spindle Pulley Removal

SHAOXING QIFENG AUTO PARTS CO., LTD. , https://www.sxqfap.com