Development Status and Future Trend Analysis of High Power LED Market

In the LED market, high-power LED has a good prospect. It can not only be applied to the traditional outdoor lighting market, the strong light flashlight market, but also gradually penetrate into the emerging fields such as automobile headlights, mobile phone flashlights and ultraviolet LED lights. The global high-power LED market has been rising year after year, while ceramic packaging has no high power compared to PPA/PCT packaging and EMC packaging. LEDs are LEDs with large rated operating current. Ordinary LED power is generally 0.05W, working current is 20mA, while high-power LED can reach 1W, 2W, or even tens of watts, and the operating current can range from tens of milliamps to hundreds of milliamps. As the fourth-generation electric light source, high-power LED has the advantages of small size, safe low voltage, long life, high electro-optical conversion efficiency, fast response, energy saving and environmental protection. In recent years, the high-power LED market has developed rapidly. The global high-power LED market has grown from US$5,053 million (approximately RMB33.514 billion) in 2008 to US$12,399 million (approximately RMB82.235 billion) in 2015. It is estimated that the global high-power LED market will reach around RMB 85 billion in 2016. High-power LEDs have developed rapidly in the early stage, and it is expected to achieve large-scale growth in some special lighting fields in the future. The medium and long-term goals include a larger share in the field of general lighting and good development prospects. In the LED market, high-power LED has a good prospect. It can not only be applied to the traditional outdoor lighting market, the strong light flashlight market, but also gradually penetrate into the emerging fields such as automobile headlights, mobile phone flashlights and ultraviolet LED lights. The global high-power LED market has been rising year after year, and ceramic packaging has an irreplaceable advantage over PPA/PCT packaging and EMC packaging. Ceramic substrates have become a necessity for high-power LEDs. High-power LEDs have multiple advantages over traditional lighting. Long service life, high-power LED street lamp with a service life of more than 50,000 hours; more energy-saving, more than 80% energy saving than high-pressure sodium lamps; more green, high-power LED street lamps do not contain lead, mercury and other pollution elements, no impact on the environment Contamination; safer to use, impact resistant, strong shock resistance, LED light in the visible range, no UV and infrared radiation, and no filament and glass casing, no traditional lamp tube fragmentation. LED streetlights can replace traditional lighting because they are compatible, interchangeable, and modular, standardized, and standardized in functional lighting applications. The light decay of high-power LED street lamps is small, and the light decay of less than 5% in one year can still meet the requirements of road use illumination after 10 years of use. However, the traditional illumination light decays, and it has dropped by more than 30% in a year or so. Markets, technologies and costs are mutually reinforcing and mutually influential. Technological advances have spawned new application markets, and cost reductions have spurred the penetration of technology into emerging markets. The rise of emerging markets has placed higher demands on technology and cost, and this dependency is no exception to the LED industry. Since 2013, in addition to the traditional outdoor lighting market and the strong light flashlight market, high-power ceramic packaging light sources have gradually penetrated into the fields of automobile headlights, mobile phone flashlights, and ultraviolet LED lamps. China's LED packaging market is huge. In 2008, China's LED packaging market was about 18.5 billion yuan. By 2015, China's LED packaging market has grown to 61.5 billion yuan and will continue to grow. Especially in recent years, the ceramic packaging market has developed rapidly, reaching a growth rate of 10 billion yuan per year in 2014 and 2015. It is expected that in the next few years, LED streetlights, automotive lighting, landscape lighting and other fields for high-power LED applications will usher in a new round of development, which will definitely drive the market share of high-power LEDs to further increase, and the market prospects are expected.

our dished heads are used in a variety of applications and industries such as storage tanks, pressure vessels, road tank, food processing operations, chemical plants ,Nuclear operation, Oil Refining, Architectural feature, power generation.

Due to our forming experience and equipment, we can spin or press the first part of the process of forming your products, It depend on the thickness and material performance,

Our main products are 2:1 SE dished heads, Torispherical heads, Cones,Hemispherical Heads etc

Choosing the right type is the key decision for each customer and one for which our experience team to happy to give advice, simple speaking, the torispherical heads, the less ressure it can withstand, Conversely, the deeper dished heads, for example Elliptical heads, hemispherical, the greater pressure it can take.

Our in house-capability to form dished heads by cold press brings major benefits to our customers and sets us apart from others dished heads manufactures

For carbon steel dished heads, we can forming this dished heads from 76-9000mm in diameter and below 250mm in thickness  

The general forming process as the below sketches forming process

Technical Delivery Condition
1,Our material (hot Rolled Unalloyed structural steel, high and low temperature steel, High Alloy steel)
We have no carbon steel plates in our stock and most of plates are from Chinese steel market or mill. Meanwhile As Japanese owed company, We can also source the plates from Japanese ex-mill if end user can`t accept ex-chinese mill.
Basically the delivery time shall be below 20days for dished heads if plates are from steel market. and Max plates width from them is below 2200mm. it means that the seamless dished heads diameter shall be below about 1800mm.
The max width CS plates that Chinese mill can do is below 4700mm,and dished heads can be seamless below 3800mm in
diameter.


2,Enquiry/order required information

We can give our clients once they gave us the below information

But if clients tolerance is higher than below Hokkai standards, it shall be provided to Hokkai prior to offer or ordering.

Enquiry/order required information

Stainless Steel Cone Head

Stainless Steel Cone Head,Stainless Carbon Steel Cone Head,Stainless Steel Cone-Shaped Head,Quality Stainless Steel Cone Head

YIXING HOKKAI HEAD PLATE CO.,LTD , http://www.hokkaidishedend.com