A403 Stainless Steel Pipe Fittings Reducing Tee

Production range of stainless steel butt welded pipe fittings.
Stainless steel elbow: 45deg elbow, 90deg elbow, 180deg elbow.
Stainless steel tee: straight tee, reducing tee.
Stainless steel reducer: eccentric reducer, concentric reducer.
Stainless steel cross: straight cross, reducing cross .
Stainless steel lap joint stub end.
Stainless steel cap.
 
Products specification:
Certificates and Packing:
Test certificates: Mill test certificate as per EN 10204 / 3.1B.
 Packing:  Plywood Case .







  Production range of stainless steel butt welded pipe fittings.
Stainless steel elbow: 45deg elbow, 90deg elbow, 180deg elbow.
Stainless steel tee: straight tee, reducing tee.
Stainless steel reducer: eccentric reducer, concentric reducer.
Stainless steel cross: straight cross, reducing cross .
Stainless steel lap joint stub end.
Stainless steel cap.
 
Products specification:
Certificates and Packing:
Test certificates: Mill test certificate as per EN 10204 / 3.1B.
 Packing:  Plywood Case .







 

Valves are found in virtually every industrial process, including water and sewage processing, mining, power generation, processing of oil, gas and petroleum, food manufacturing, chemical and plastic manufacturing and many other fields.

People in developed nations use valves in their daily lives, including plumbing valves, such as taps for tap water, gas control valves on cookers, small valves fitted to washing machines and dishwashers, safety devices fitted to hot water systems, and poppet valves in car engines.

In nature there are valves, for example one-way valves in veins controlling the blood circulation, and heart valves controlling the flow of blood in the chambers of the heart and maintaining the correct pumping action.

Valves may be operated manually, either by a handle, lever, pedal or wheel. Valves may also be automatic, driven by changes in pressure, temperature, or flow. These changes may act upon a diaphragm or a piston which in turn activates the valve, examples of this type of valve found commonly are safety valves fitted to hot water systems or boilers.

More complex control systems using valves requiring automatic control based on an external input (i.e., regulating flow through a pipe to a changing set point) require an actuator. An actuator will stroke the valve depending on its input and set-up, allowing the valve to be positioned accurately, and allowing control over a variety of requirements.

Valves

Stop Valves, Ball Cock, Angle Valves, Gate Valves, Check Valves

ZHEJIANG KINGSIR VALVE CO., LTD. , https://www.kingsirvalve.com