Googol Series Biogas Generator, 1800rpm/1200rpm, 60Hz ;  CH4 : 60% , CO2 : 40% |  |  |  |  |  |  |  |  |  |
Genset Model |  | HGGM200/6 | HGGM250/6 | HGGM325/6 | HGGM400/6 | HGGM500/6 | HGGM650/6 | HGGM1000/6 | HGGM1285/6 |
Engine Model |  | RTA780G2 | RTA780G4 | RTA890G2 | RTA1120G2 | RTA1340G2 | JTA2160SG2 | JTA3240SG2 | JTA4320SG2 |
Rating Speed | rpm | 1800 | 1800 | 1800 | 1800 | 1800 | 1200 | 1200 | 1200 |
Frequency | Hz | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 |
Generator Output (COP) | kW | 160 | 200 | 260 | 320 | 400 | 573 | 800 | 1028 |
Power Factor |  | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 |
Gas Engine Parameter |  |  |  |  |  |  |  |  |  |
Engine Output  (COP) | kW | 180 | 222 | 278 | 355 | 438 | 629 | 842 | 1152 |
Air Ratio | λ | 1.67 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 |
Configuration |  | 6 In line | 6 In line | 8 Vee | 10 Vee | 12 Vee | 8 Vee | 12 Vee | 16 Vee |
Displacement | l | 12.8 | 12.8 | 14.6 | 18.3 | 21.9 | 35.4 | 53.1 | 70.8 |
Bore | mm | 128 | 128 | 128 | 128 | 128 | 170 | 170 | 170 |
Stroke | mm | 166 | 166 | 142 | 142 | 142 | 195 | 195 | 195 |
Compression Ratio |  | 11:1 | 11:1 | 12:1 | 12:1 | 12:1 | 12:1 | 12:1 | 12:1 |
Piston Speed | m/s | 9.96 | 9.96 | 8.52 | 8.52 | 8.52 | 7.8 | 7.8 | 7.8 |
Number of Flywheel Teeth |  | 160 | 160 | 160 | 160 | 160 | 218 | 218 | 218 |
Flywheel House Size |  | SAE1-14 | SAE1-14 | SAE1-14 | SAE1-14 | SAE1-14 | SAE00-18 | SAE00-21 | SAE00-21 |
System Parameter |  |  |  |  |  |  |  |  |  |
Oil Capacity | l | 40 | 40 | 70 | 80 | 90 | 160 | 180 | 240 |
Max. Allowed Oil Temperature | °C | 110 | 110 | 110 | 110 | 110 | 110 | 110 | 110 |
Oil Pressure Warning | kPa | 200 | 200 | 200 | 200 | 200 | 300 | 300 | 300 |
Oil Pressure Shutdown | kPa | 160 | 160 | 160 | 160 | 160 | 200 | 200 | 200 |
Coolant Capacity for Engine | l | 18 | 18 | 36 | 42 | 44 | 70 | 100 | 140 |
Max. Coolant Warning Temperature  | °C | 90 | 90 | 90 | 90 | 90 | 93 | 93 | 93 |
Max. Coolant Shutdown Temperature  | °C | 95 | 95 | 95 | 95 | 95 | 97 | 97 | 97 |
Max. Intercooler Outlet Temperature  | °C | 50 | 50 | 50 | 50 | 50 | 40.5 | 40.5 | 40.5 |
Flow of Coolant pump (JW) | m³/h | 24 | 24 | 30 | 30 | 30 | 39 | 39 | 64 |
Flow of Coolant pump (LT) | m³/h | 14 | 14 | 14 | 14 | 14 | 36 | 36 | 60 |
Max. Exhaust Temperature | °C | 537 | 537 | 537 | 537 | 537 | 453 | 453 | 453 |
Exhaust Flow | kg/h | 697 | 871 | 1150 | 1383 | 1708 | 2971 | 4370 | 6044 |
Exhaust Flange Diameter | mm | 1*125 | 1*125 | 2*125 | 2*125 | 2*125 | 1*250 | 1*250 | 1*250 |
Charging Alternator Capacity | A | 35 | 35 | 35 | 35 | 35 | 55 | 55 | 55 |
Starting Voltage | V | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 |
Thermal Balance |  |  |  |  |  |  |  |  |  |
JW Coolant Heat | ± 8% kW | 102 | 129 | 158 | 190 | 226 | 310 | 422 | 548 |
CAC Intercooler Heat | ± 8% kW |  |  |  |  |  | 42 | 67 | 93 |
Exhaust Heat up to 120°C | ± 8% kW | 120 | 146 | 171 | 220 | 272 | 336 | 442 | 560 |
Energy Input |  kW | 469 | 580 | 716 | 882 | 1081 | 1454 | 1956 | 2507 |
ELectrical Efficiency | % | 34.1 | 34.5 | 36.3 | 36.3 | 37.0 | 39.4 | 40.9 | 41.0 |
Mechanical Efficiency | % | 36.5 | 36.6 | 38.3 | 38.2 | 39.1 | 41.6 | 42.9 | 43.0 |
Thermal Efficiency | % | 47.3 | 47.4 | 45.9 | 46.5 | 46.1 | 44.4 | 44.2 | 44.2 |
Total Efficiency | % | 81.4 | 81.9 | 82.2 | 82.8 | 83.1 | 83.8 | 85.1 | 85.2 |
Gas Consumption | MJ/kWh | 10.56 | 10.43 | 9.92 | 9.92 | 9.73 | 9.14 | 8.80 | 8.78 |
Generator Parameter |  |  |  |  |  |  |  |  |  |
Generator Model |  | ECO38-1SN/4 | ECO38-3SN/4 | ECO38-2LN/4 | ECO40-1S/4 | ECO40-2S/4 | MX-500-6 | MX-800-6 | MX-1000-6 |
Generator Prime Output | kW | 176 | 216 | 288 | 384 | 432 | 550 | 880 | 1100 |
Generator Efficiency @ 0.8PF |  | 93.4% | 94.2% | 94.8% | 95.1% | 94.7% | 94.8% | 95.3% | 95.4% |
Genset Dimension |  |  |  |  |  |  |  |  |  |
Length | mm | 3100 | 3100 | 3300 | 3500 | 3600 | 4600 | 4500 | 5000 |
Width | mm | 1300 | 1300 | 1500 | 1500 | 1500 | 2190 | 1600 | 1600 |
Height | mm | 1700 | 1700 | 2000 | 2000 | 2000 | 2300 | 2200 | 2300 |
Genset Weight | kg | 2500 | 2500 | 3500 | 3900 | 4300 | 8250 | 10500 | 13500 |
Googol Series Biogas Generator, 1800rpm/1200rpm, 60Hz ;  CH4 : 60% , CO2 : 40% |  |  |  |  |  |  |  |  |  |
Genset Model |  | HGGM200/6 | HGGM250/6 | HGGM325/6 | HGGM400/6 | HGGM500/6 | HGGM650/6 | HGGM1000/6 | HGGM1285/6 |
Engine Model |  | RTA780G2 | RTA780G4 | RTA890G2 | RTA1120G2 | RTA1340G2 | JTA2160SG2 | JTA3240SG2 | JTA4320SG2 |
Rating Speed | rpm | 1800 | 1800 | 1800 | 1800 | 1800 | 1200 | 1200 | 1200 |
Frequency | Hz | 60 | 60 | 60 | 60 | 60 | 60 | 60 | 60 |
Generator Output (COP) | kW | 160 | 200 | 260 | 320 | 400 | 573 | 800 | 1028 |
Power Factor |  | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 | 0.8 |
Gas Engine Parameter |  |  |  |  |  |  |  |  |  |
Engine Output  (COP) | kW | 180 | 222 | 278 | 355 | 438 | 629 | 842 | 1152 |
Air Ratio | λ | 1.67 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 | 1.7 |
Configuration |  | 6 In line | 6 In line | 8 Vee | 10 Vee | 12 Vee | 8 Vee | 12 Vee | 16 Vee |
Displacement | l | 12.8 | 12.8 | 14.6 | 18.3 | 21.9 | 35.4 | 53.1 | 70.8 |
Bore | mm | 128 | 128 | 128 | 128 | 128 | 170 | 170 | 170 |
Stroke | mm | 166 | 166 | 142 | 142 | 142 | 195 | 195 | 195 |
Compression Ratio |  | 11:1 | 11:1 | 12:1 | 12:1 | 12:1 | 12:1 | 12:1 | 12:1 |
Piston Speed | m/s | 9.96 | 9.96 | 8.52 | 8.52 | 8.52 | 7.8 | 7.8 | 7.8 |
Number of Flywheel Teeth |  | 160 | 160 | 160 | 160 | 160 | 218 | 218 | 218 |
Flywheel House Size |  | SAE1-14 | SAE1-14 | SAE1-14 | SAE1-14 | SAE1-14 | SAE00-18 | SAE00-21 | SAE00-21 |
System Parameter |  |  |  |  |  |  |  |  |  |
Oil Capacity | l | 40 | 40 | 70 | 80 | 90 | 160 | 180 | 240 |
Max. Allowed Oil Temperature | °C | 110 | 110 | 110 | 110 | 110 | 110 | 110 | 110 |
Oil Pressure Warning | kPa | 200 | 200 | 200 | 200 | 200 | 300 | 300 | 300 |
Oil Pressure Shutdown | kPa | 160 | 160 | 160 | 160 | 160 | 200 | 200 | 200 |
Coolant Capacity for Engine | l | 18 | 18 | 36 | 42 | 44 | 70 | 100 | 140 |
Max. Coolant Warning Temperature  | °C | 90 | 90 | 90 | 90 | 90 | 93 | 93 | 93 |
Max. Coolant Shutdown Temperature  | °C | 95 | 95 | 95 | 95 | 95 | 97 | 97 | 97 |
Max. Intercooler Outlet Temperature  | °C | 50 | 50 | 50 | 50 | 50 | 40.5 | 40.5 | 40.5 |
Flow of Coolant pump (JW) | m³/h | 24 | 24 | 30 | 30 | 30 | 39 | 39 | 64 |
Flow of Coolant pump (LT) | m³/h | 14 | 14 | 14 | 14 | 14 | 36 | 36 | 60 |
Max. Exhaust Temperature | °C | 537 | 537 | 537 | 537 | 537 | 453 | 453 | 453 |
Exhaust Flow | kg/h | 697 | 871 | 1150 | 1383 | 1708 | 2971 | 4370 | 6044 |
Exhaust Flange Diameter | mm | 1*125 | 1*125 | 2*125 | 2*125 | 2*125 | 1*250 | 1*250 | 1*250 |
Charging Alternator Capacity | A | 35 | 35 | 35 | 35 | 35 | 55 | 55 | 55 |
Starting Voltage | V | 24 | 24 | 24 | 24 | 24 | 24 | 24 | 24 |
Thermal Balance |  |  |  |  |  |  |  |  |  |
JW Coolant Heat | ± 8% kW | 102 | 129 | 158 | 190 | 226 | 310 | 422 | 548 |
CAC Intercooler Heat | ± 8% kW |  |  |  |  |  | 42 | 67 | 93 |
Exhaust Heat up to 120°C | ± 8% kW | 120 | 146 | 171 | 220 | 272 | 336 | 442 | 560 |
Energy Input |  kW | 469 | 580 | 716 | 882 | 1081 | 1454 | 1956 | 2507 |
ELectrical Efficiency | % | 34.1 | 34.5 | 36.3 | 36.3 | 37.0 | 39.4 | 40.9 | 41.0 |
Mechanical Efficiency | % | 36.5 | 36.6 | 38.3 | 38.2 | 39.1 | 41.6 | 42.9 | 43.0 |
Thermal Efficiency | % | 47.3 | 47.4 | 45.9 | 46.5 | 46.1 | 44.4 | 44.2 | 44.2 |
Total Efficiency | % | 81.4 | 81.9 | 82.2 | 82.8 | 83.1 | 83.8 | 85.1 | 85.2 |
Gas Consumption | MJ/kWh | 10.56 | 10.43 | 9.92 | 9.92 | 9.73 | 9.14 | 8.80 | 8.78 |
Generator Parameter |  |  |  |  |  |  |  |  |  |
Generator Model |  | ECO38-1SN/4 | ECO38-3SN/4 | ECO38-2LN/4 | ECO40-1S/4 | ECO40-2S/4 | MX-500-6 | MX-800-6 | MX-1000-6 |
Generator Prime Output | kW | 176 | 216 | 288 | 384 | 432 | 550 | 880 | 1100 |
Generator Efficiency @ 0.8PF |  | 93.4% | 94.2% | 94.8% | 95.1% | 94.7% | 94.8% | 95.3% | 95.4% |
Genset Dimension |  |  |  |  |  |  |  |  |  |
Length | mm | 3100 | 3100 | 3300 | 3500 | 3600 | 4600 | 4500 | 5000 |
Width | mm | 1300 | 1300 | 1500 | 1500 | 1500 | 2190 | 1600 | 1600 |
Height | mm | 1700 | 1700 | 2000 | 2000 | 2000 | 2300 | 2200 | 2300 |
Genset Weight | kg | 2500 | 2500 | 3500 | 3900 | 4300 | 8250 | 10500 | 13500 |
Steel milling is to fix the blank, use a high-speed rotating cutter to cut the blank, cut out the required shape and features, CNC Milling machine can process complex shapes and features. Steel milling is a milling cutter that is suitable for machining planes, grooves, various forming surfaces (such as flower milling keys, gears and threads) and special shapes of the mold. Steel is the most popular material requested by our customers. Our experienced mechanics and multi-function machines are fully equipped to service your complex steel machined parts.
Customized Brass Machining,Machining Online Precision,Machining Service Online Precision
Chongqing Jin Te Rui Machine Co.,Ltd , https://www.cncjtr.com