Turbo / Turbocharger for 4lgk 3502594 Volvo

Our turbocharger pass high speed CORE balancing test.

We can also produce according to samples.

Our products sell well all over the world and have won high compliment.

We have sufficient experience and high responsibility.

Welcome to send us your sample and we can provide with you what you want.







Our turbocharger pass high speed CORE balancing test.

We can also produce according to samples.

Our products sell well all over the world and have won high compliment.

We have sufficient experience and high responsibility.

Welcome to send us your sample and we can provide with you what you want.

Compared to other rolling-element bearings, Slewing Bearings are thin in section and are often made in diameters of a metre or more; the slewing bearings on the Falkirk Wheel are 4 metres diameter and fit over a 3.5 metre axle. Slewing bearings resemble oversize aircraft control surface bearings.
A slewing bearing or slewing ring is a rotational Rolling-Element Bearing or plain bearing that typically supports a heavy but slow-turning or slow-oscillating load, often a horizontal platform such as a conventional crane, a swing yarder, or the wind-facing platform of a horizontal-axis windmill.
Slewing bearings often use two rows of rolling elements. They often use three race elements, such as an inner ring and two outer ring "halves" that clamp together axially.
Slewing bearings are often made with gear teeth integral with the inner or outer race, used to drive the platform relative to the base.
As for other bearings that reciprocate, rather than rotating continuously, lubrication can be difficult. The oil wedge built up in a continuously rotating bearing is disrupted by the stop start motion of slewing. Instead, a hydrostatic bearing with pumped oil flow may be used.

Slewing Bearings

Slewing Bearings,Slewing Ring Bearing,Single-Row Ball Slewing Bearing,High Precision Slewing Bearings

Ningbo Ritbearing Imp & Exp Co.,Ltd. , http://www.ritbearingchina.com