Scrap Varnished Copper Wire Recycling Machine

Model NO.: QJF
Function: Waste Copper Wire Recycling
Power Support: Electric
Power: 52.36kw
Voltage: Customized
Output: Clean Copper Pellet&Plastic Pellet
Dimension: 4.3*1.95*2.4m
Applicable Copper Wire: 0.3-20mm Diameter
Weight: 3400kg
Trademark: jingliang
Transport Package: Container&Ply Wooden Case
Specification: 11-75KW
Origin: China
HS Code: 84798190
Model NO.: QJF
Function: Waste Copper Wire Recycling
Power Support: Electric
Power: 52.36kw
Voltage: Customized
Output: Clean Copper Pellet&Plastic Pellet
Dimension: 4.3*1.95*2.4m
Applicable Copper Wire: 0.3-20mm Diameter
Weight: 3400kg
Trademark: jingliang
Transport Package: Container&Ply Wooden Case
Specification: 11-75KW
Origin: China
HS Code: 84798190
Copper wire Recycling Machine Features: 
QJF series copper cable recycling machine is used for recycling waste household communication cables, car cables,motor cables and other industrial cables. The machine mainly includes crushing and separating,and it also has high efficiency dust collecting system to get clearly copper pellet and plastic pellet. 
Copper wire Recycling Machine Advantage:
1. Integrated structure, small dimensions, easy to move, saving space.
2. Low power consumption, stable performance. 
3. Minimum copper recycling rate can reach 99%.
4. No water is needed, no dust, no environmental pollution.
5. Controlled by electricity control panel, highly automatic.

Copper wire Recycling Machine Application: 
Applicable cables: Waste communication copper cables, motor cable, car cable, industrial cable,household cable, enamelled cable.
Applicable cable diameter: 0.3-20mm  
If you are not sure whether your cables are applicable for our equipment, you could send some cables to us for testing. TESTING IS FOR FREE! 

Applicable copper wires: 
Scrap Varnished Copper Wire Recycling Machine
Copper wire Recycling Machine Working principle:
1.Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2.The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3.The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4.All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.

Copper wire Recycling Machine Different models: 

 QJF-400-1 Copper wire Recycling Machine: 
Scrap Varnished Copper Wire Recycling Machine QJF-400-1(capacity:80-100kg/h) is suitable for small size factory or customers who newly start wire recycling. It has compact structure and takes small space, easy to move and operate. Only ONE operator is required to start and handle the whole system.
  QJF-400-1 Copper wire Recycling Machine Specifications:
Model  Recycling capacity Processed wire dia. Total power Voltage Dimension  Weight 
QJF-400-1 80-100kg/h 0.3-20mm 11.92KW As required 1.5*1.5*1.9m 750kg
 QJF-400-1 Copper wire Recycling Machine Parts:
Scrap Varnished Copper Wire Recycling Machine
 
QJF-400 Copper wire Recycling Machine Features: 
Scrap Varnished Copper Wire Recycling Machine QJF-400(capacity:150-200kg/h) is suitable for middle size factory. It finishes the complete recycling process in closed structure to avoid pollution and noise. Crushed copper wire go through the high pressure fan, and dust inside will be cleaned and finally vibrating separator will take out clear copper and plastic pellet from different exit. 
 
QJF-400 Copper wire Recycling Machine Specifications: 
Model  Recycling capacity Processed wire dia. Total power Voltage Dimension  Weight 
QJF-400 200-300kg/h 0.3-20mm 23.12KW As required 2.7*1.9*2.3m 1200kg
                                 
QJF-600 Copper wire Recycling Machine Features: 
QJF-600(capacity:300-400kg/h)has high recycling efficiency and high purity. Mixed crushed material(copper pellet and plastic pellet)enter vibrating separator together with airflow,and finally the pellet are put on the small vibrator(second separator)to get 100% purity.
Scrap Varnished Copper Wire Recycling Machine
QJF-600 Copper wire Recycling Machine Specifications: 
Model  Recycling capacity Processed wire dia. Total power Voltage Dimension  Weight 
QJF-600 300-400kg/h 0.3-20mm 52.36KW As required 4.3*1.95*2.4m 3400kg
QJF-600 Copper wire Recycling Machine Parts:
Scrap Varnished Copper Wire Recycling Machine


FAQ 
 1.Is there quick-wear part on the machine? 
The spare part of the machine is blades and screen, their use life is more than 2 years, and we could also supply blade sharping machine to you for maintenance.
 2. What's the lognest continuous working time for the recycling machine?   
 Normally 10 hours per day. 

 3.Is the machine easy to operate? How many workers required to operate it? 
We design precise but simple control system for the machine.
For single recycling machine, only one worker is required.
For complete recycling line, two workers are required.


Contact information:  
Attn: Tina 
Mobile:+8615981925357 
 
 
Copper wire Recycling Machine Features: 
QJF series copper cable recycling machine is used for recycling waste household communication cables, car cables,motor cables and other industrial cables. The machine mainly includes crushing and separating,and it also has high efficiency dust collecting system to get clearly copper pellet and plastic pellet. 
Copper wire Recycling Machine Advantage:
1. Integrated structure, small dimensions, easy to move, saving space.
2. Low power consumption, stable performance. 
3. Minimum copper recycling rate can reach 99%.
4. No water is needed, no dust, no environmental pollution.
5. Controlled by electricity control panel, highly automatic.

Copper wire Recycling Machine Application: 
Applicable cables: Waste communication copper cables, motor cable, car cable, industrial cable,household cable, enamelled cable.
Applicable cable diameter: 0.3-20mm  
If you are not sure whether your cables are applicable for our equipment, you could send some cables to us for testing. TESTING IS FOR FREE! 

Applicable copper wires: 
Scrap Varnished Copper Wire Recycling Machine
Copper wire Recycling Machine Working principle:
1.Put wires and cables into the crusher, in which they are crushed and plastic sheath and copper separated completely. The length of the crushed material is based on the mesh of the riddle: the bigger the mesh is the longer the crushed material will be and the larger the output will be. The mesh should be chosen in production according to the type of the material.
2.The crushed material (mixture of copper granules and plastic pieces) is conveyed to the separator by the conveyor, during which procedure dust and part of plastic pieces of light weight(including fiber, rope, or tapes, etc. mixed in the wires) are collected by the pressure-reducing blower. The above opening of the pressure reducing blower is connected with the dust collector opening in which a dust collecting bag is used to prevent discharge of dust for the purpose of environmental protection. Dust and part of plastic pieces of light weight are collected in this bag and will be discharged when the bag is full.
3.The separator is used for separating plastic pieces and copper granules. According to the differences of the physical properties and specific gravity between different materials, there is specific gravity deviation under the forces of Aerodynamic and Vibration friction. By adjusting the speed of material conveying and amplitude parameters, copper granules (of larger specific gravity) will move to the riddle bottom and move from down to up, and plastic pieces (of smaller specific gravity) will move to the above of copper granules and move from up to down, and in the end they will both be discharged through different openings.
4.All the units are installed on the Underbed to form a whole structure. The machine is adjusted ready for production before shipping, and the customer only need to connect it to the power supply.

Copper wire Recycling Machine Different models: 

 QJF-400-1 Copper wire Recycling Machine: 
Scrap Varnished Copper Wire Recycling Machine QJF-400-1(capacity:80-100kg/h) is suitable for small size factory or customers who newly start wire recycling. It has compact structure and takes small space, easy to move and operate. Only ONE operator is required to start and handle the whole system.
  QJF-400-1 Copper wire Recycling Machine Specifications:
Model  Recycling capacity Processed wire dia. Total power Voltage Dimension  Weight 
QJF-400-1 80-100kg/h 0.3-20mm 11.92KW As required 1.5*1.5*1.9m 750kg
 QJF-400-1 Copper wire Recycling Machine Parts:
Scrap Varnished Copper Wire Recycling Machine
 
QJF-400 Copper wire Recycling Machine Features: 
Scrap Varnished Copper Wire Recycling Machine QJF-400(capacity:150-200kg/h) is suitable for middle size factory. It finishes the complete recycling process in closed structure to avoid pollution and noise. Crushed copper wire go through the high pressure fan, and dust inside will be cleaned and finally vibrating separator will take out clear copper and plastic pellet from different exit. 
 
QJF-400 Copper wire Recycling Machine Specifications: 
Model  Recycling capacity Processed wire dia. Total power Voltage Dimension  Weight 
QJF-400 200-300kg/h 0.3-20mm 23.12KW As required 2.7*1.9*2.3m 1200kg
                                 
QJF-600 Copper wire Recycling Machine Features: 
QJF-600(capacity:300-400kg/h)has high recycling efficiency and high purity. Mixed crushed material(copper pellet and plastic pellet)enter vibrating separator together with airflow,and finally the pellet are put on the small vibrator(second separator)to get 100% purity.
Scrap Varnished Copper Wire Recycling Machine
QJF-600 Copper wire Recycling Machine Specifications: 
Model  Recycling capacity Processed wire dia. Total power Voltage Dimension  Weight 
QJF-600 300-400kg/h 0.3-20mm 52.36KW As required 4.3*1.95*2.4m 3400kg
QJF-600 Copper wire Recycling Machine Parts:
Scrap Varnished Copper Wire Recycling Machine


FAQ 
 1.Is there quick-wear part on the machine? 
The spare part of the machine is blades and screen, their use life is more than 2 years, and we could also supply blade sharping machine to you for maintenance.
 2. What's the lognest continuous working time for the recycling machine?   
 Normally 10 hours per day. 

 3.Is the machine easy to operate? How many workers required to operate it? 
We design precise but simple control system for the machine.
For single recycling machine, only one worker is required.
For complete recycling line, two workers are required.


Contact information:  
Attn: Tina 
Mobile:+8615981925357 
 
 

These housed units are selected where setscrew locking is preferred, but inner- ring stress and/or distortion are of major concern. They are frequently used in limited-space applications and where reversing shaft rotation is encountered.
Design Attributes
Bearings are locked onto the shaft by two set screws, 120 degrees apart, tightened in the collar and passing through drilled holes in the inner ring.
Applications
Conveyors
General Industrial Equipment

Spherical Insert Ball Bearings

Spherical Insert Ball Bearings,Spherical Bearing Inserts,Insert Ball Bearings,Stainless Steel Spherical Ball Bearing

Ningbo Ritbearing Imp & Exp Co.,Ltd. , http://www.ritbearingchina.com