Marine Airbag for Heavy Lifting, Vessel′s Moving

MARINE AIRBAG FOR HEAVY LIFTING, VESSEL'S MOVING

The combination of lifting airbag can have the capability of lifting and transportation heavy objects over 16, 000 ton. They are being widely utilised in moving extra heavy objects such as large scale reinforced concrete, structure, caission, oil drilling equipment, whole building structure and etc.
Airbag heavy lifting and transportation needs no railways or trolley, has low demand of ground so this technology can save most investment and time.

The booming airbag caisson transportation is the typical illustration of this application. In appropriat condition caisson can be launched into water directly with airbag or else caisson will be shifted to sub-mersible barge for launch.

CLASSIFICATION OF HEAVY LIFTING, VESSEL'S MOVING

- Size difference

Diameter(D): 0.8~2.0M
Effective Length(EL): 6~18M
Total Length(TL): 7~19.5M

- Standard layers

In order to confirm lifting airbags safety working pressure we define the number of layers, which means the number of synthetic-tire-cord layers. Normally we offer lifting airbag with 4, 5, 6, 7, 8 layers. Other type are available upon request.

MATERIAL TYPE OF SYNTHETIC-TIRE-CORD


There are two kinds of synethetic-tire-cords with different performance.

We define the suitable lifting airbag as per the above 3 items, for example:

Lifting AirbagD1.5m X EL15m(YT-6), 1260D In here:

1. D1.5: The diameter is 1.5m
2. EL15m: The effective length is 15m
3. YT-6: The number of Synethetic-tire-cord layer is 6 layers.
4. 1260D: The type of synethetic-tire-cord layer is 1260.

Angle Cutting Saw

Angle Cutting Saw is used for HDPE, PVC, PP,PVDF pipes and fittings cutting, The Bandsaw Machines for Workshop are important cutting equipment for hdpe fitting fabrication preparation. In order to make hdpe elbow, tee,cross and wye fittings fabrication in workshop, this band saw must be multi-angle cutting with cutting angle 0-67.5° . It should have high angle precision for band saw machines to make accurate angle fitting fabrication. Wuxi Yuda has the ideal Angle Cutting equipment from 40-2600mm to match hdpe fittings fabrication machine. A table saw excels in cutting through bigger plastic pipes or thick plastic blocks. The best saw for cutting plastic pipe in angle can choose from DQJ series Multi-angle pipeline cutting machine. for example, DQJ315 Multi-angle HDPE Pipe Cutting Machine, DQJ630 & DQJ800 Plastic Pipe Band Saws, DQJ1200, DQJ1600 Band Saw Machines and DQJ2600 Poly Pipe Angle Cutting Saw. If for automatic cutting mode, you can choose DQJ-A series Automatic Plastic Cutting Equipment.

Angle Cutting Saw,Band Saw Cutting,Bandsaw Machine,Plastic Pipe Cutter

WUXI MEIERTE MACHINERY TECHNOLOGY CO.,LTD , https://www.pipefusionweldings.com