High Quality Plastic Cap Injection Moulding Machine (SZ)

Features:
1) LCD computer control with big display screen
2) Hydraulic double proportional valve
3) Hard chrome plated high tensile strength steel tie bars
4) Generous space for fitting large moulds
5) Large opening stroke
6) Two position transducers to control Clamping and Injection
7) Four stages of injecting, independent velocity and pressure control
8) Hydraulic mould height adjustment device
9) Screw cold-start prevention device
10) Melt decompression control
11) Screw back pressure control
12) Multiple hydraulic ejection
13) Differential high speed clamping
14) Centralized lubrication system
15) Low pressure mould protection device
16) Mechanical safety interlock
17) Double electrical safety interlock
18) Oil return filter
19) Oil tank with inner stainless steel container

  Service Term
1. Installation
The initial installation is not included with the professional member. All installation with our team must be scheduled at least 4 weeks in advance before actual trip taken. All necessary connectivity must be ready prior the service being scheduled.
 
While our professional member arrives at the site for a completed and final installation, two days training course will be provide to the customer for operation and maintenance procedure. The initial installation is provided within 5 working days  . The actual installation days many vary, based on different machine mode and packing lines. Each day of working hour consist at 8 working hours. Any additional day will be charge according to our service fee listed below.
 
When initial installation is being called for our professional member required, the surcharge will be made advance by the purchase at US$80/person/day plus all travel expenses. Travel expenses include documentation fees visa charge); local and destination transportation charges  air, train, ferry, bus, taxi or any means of transportation required to arrive to/from destination); accommodation (minimum of 3 star hotel facility) and 3 daily hot meals.
 
2. Translator
If translator is required and can't be provided by purchaser then we will provide a translator for same charge as initial installation stipulated above. All communicate with our engineer should be in Chinese. Any translation provide by us will be based between English and Chinese only. Purchaser is responsible for the translation between local language and English.

Commercial Terms
1. Warranty
All parts are under two Year Warranty with defects from manufacturer. Any other defect caused by human error, mishandling, wear-and tear & any foreseeable conditions will not be covered by this warranty. All electronic parts and component can be guaranteed by original part's manufacturer or our company.
 
2. Payment
30% of the total contract amount is to be T/T into assigned account at the period of 5 working days after the Purchase contract is signed.
70% of the balance must to be made via T/T of the remainder balance amount of the purchase contract before the ordered equipment is to be delivered 10 working days prior of the shipment.
We also accept L/C payment, 30% down payment, and 70% L/C at sight
 
 



 
 

According to the coating characteristics

According to the characteristics of surface coated Steel Pipe can be divided into: Clarinet (not coated) and coating tube.

The coating pipe has galvanized pipe, aluminum, chrome plated tube, alumetized tubes and other alloy layer of steel pipe.

The coating pipe is coated with an outer coating pipe, an inner coating pipe, an inner and an outer coating pipe. Commonly used coatings are plastic, epoxy, coal tar epoxy resin as well as a variety of glass type of anti-corrosion coating materials. Galvanized pipe is divided into KBG pipe, JDG pipe, screw pipe, etc.

Photo of our steel pipe:

Application

1 pipe for pipe. Such as: water, gas pipe, seamless pipe, the use of steam pipelines, oil pipelines, oil and gas pipelines. Irrigation water tap with pipe and spray irrigation pipe, etc..

2 pipe for thermal engineering equipment. Such as boiling water boiler pipe, a super heated steam tube, locomotive boiler super heater tube, opium pipe, small smoke tube, arch brick tube and the high temperature and high pressure boiler tube.

3 pipe for machinery industry. Such as aviation structure tube (round tube, oval tube, flat and oval tubes), automobile semi axle tube and axle tube, automobile and tractor structure tube, tractor oil cooler tube, Agricultural Machinery with square tube with rectangular tubes, transformer tube as well as bearing tube etc..

4 pipe for petroleum geological drilling. Such as oil drilling pipe, drill pipe (Kelly and hexagonal drill), drilling, oil pipe, petroleum casing pipe and all kinds of pipe joints, geological drilling pipe (tube core, casing, active drill pipe, drilling very, according to the hoop and a pin connected first).

5 tubes for chemical industry. Such as: oil cracking pipe, chemical equipment, heat exchange, and pipe with pipe, stainless acid resistant pipe, chemical fertilizer with high pressure pipe and the transportation of chemical medium pipe, etc..

6 other departments to use the tube. Such as: containers with tubes (high pressure gas cylinders with the general container pipe), instrumentation, watches, shell tubes, injection needles and medical equipment, etc..

 

Sectional shape

Steel and steel products specifications is very wide, its performance requirements are various. All of these should be distinguished with changes in user requirements or working conditions. In general, the steel tube products are classified according to the shape of the section, the production method, the pipe material, the connection method, the coating characteristics and the application.

According to the pipe cross-sectional shape can be divided into: steel pipe and profiled steel pipe.

Shaped steel pipe is a kind of non circular section of the steel pipe. Including: square tube, rectangular tube, oval tube, flat oval tube, half pipe, hexagonal tube, hexagonal circular tube, equilateral hexagonal tube, tube of equilateral triangle, Pentagon plum tube, octagonal tube. A convex shaped tube, double convex tube. Biconcave shaped pipe, tube, oval - shaped tube, flat tube, tube diamond shaped, star shaped tube and parallelogram pipes, ribbed tube, drop shaped tube, internally finned tube, twisting reducing pipe, B type tube, D type tube and multilayer tube concave shape.

According to the shape of the steel pipe, it is divided into: equal section steel tube and steel tube with variable cross-section. Variable section (or variable section) steel pipe is a steel tube with periodic or non periodic changes in the shape of the cross section, inside and outside diameter and wall thickness. The main: external conical tube, conical inner tube, outer stepped tube, in the step tube, cycle section pipe, corrugated pipe, Spiral Pipe, finned tube and double barrel.

Steel Pipe

Stainless Pipe,Spiral Pipe,Steel Pipe

Unisite Group Ltd. , https://www.shipsparts.nl