High Frequency Vibration Tester Electrodynamics Xyz Axis Vibration Testing Machine

High frequency vibration tester electrodynamics XYZ axis vibration testing machine
Model: XB-OTS-DC500
 
Description & Application

 High Frequency Electromagnetic Vibration Test Machine / (Electromagnetic Vibration Test Equipment) is used to educational, research, and laboratory environments. Adopted the double- magnetic circuit structure, self-generated skeleton action circles,  Airborne Support and roller bearings and linear guidance, trunnion isolation advanced modern technology and special technology, can be completed in X,Y,Z three-axis sinusoidal vibration test and broadband random vibration tests, to be completed by the classical (half - sine, trapezoidal, saw tooth wave) pulse and shock response spectrum test. These products are widely used in national defense, weapons, aviation, aerospace, communications, electronics, electrical appliances, communications, home appliances and other fields.



Specification 
Laboratory testing equipment 3-axis electrodynamic vibrator tester High frequency dynamic vibration test machine
 
 Mechanical and Vibration Laboratory Test Equipment feature:
1. Well-designed dynamic circle skeleton, with a higher stage axial resonance frequency.
2. Two-magnetic circuit, magnetic flux leakage low, compact structure and rational.
3. Rocker Rod roller bearings straight and import-oriented composite body stiffness orientation, eccentric load capacity.
4. Trunnion isolation foundation dedicated to hormone use, the installation of mobile convenience.
5. Advanced technology move around the system to ensure that the dynamic circle of high reliability.
6. New duct design and enhance the cooling effect.
7. Static stiffness, dynamic stiffness of the bearing small balloon, raising the vibration table bearing capacity, improve low-frequency performance.
 
Composition of High Frequency Electromagnetic Vibration Test Machine
Vibration test bench, power amplify, cooling fan,Slip table,vertical expander

Horizontal Stand features:
Within small loading bench to realize higher acceleration and working frequency, to improve the loading capacity and performance of whole machine bench.
Horizontal bench and vibration bench are integral type, with perfect structure, convenience to install and adjust.
Static pressure track, V-shape, with capacity of slope-resistant and bias-loading resistant.
Built-in oil pump, good structure and easy operating.


Vertical Extended-bench features:
VT vertical extended-bench and specified clamps, precision calculated, elaborate design, to ensure the customer acquired the best performance according to perfect


Our Company
OTS (Overall Testing System)
Was established in 1978, with 35 years' history
With 30,000 square meter salable production base and 120 employees
Is one of the leading companies solely dedicated to manufacture of
Environmental Simulation Test Chambers ,Physical Testing Equipment .
(such as  constant temperature and humidity chambers, environmental chambers, climatic test chambers, rain and dust test chambers,thermal shock test chambers,fast change rate chambers, salt spray chamber,UV test chambers,walk in test chambers and other special customized test chambers  ;Tensile testing machine, vibration test machine ,carton compression testing machines, bursting strength testing machine etc.) ..
OTS has the equipment and expertise, with own R&D and consultant team, to meet and exceed your testing requirement.With offices in unrivaled quality advantage, dynamic management team with superb manufacturing process,also the quality with the world norms:ISO , ASTM, DIN, EN, GB, BS, JIS, ANSI, UL,CE, TAPPI, AATCC, IEC, VDE...
 


FAQ:
Q1 :Can you customize the product?
A:Yes, we can customize any products according to requirements.Hot selling lab electronic temperature humidity cabinet/Environmental climate test chamber also can be customized.
Q2 :How to choose the most suitable products?
A:Our professional team will give you the best suggestion,just be  patiently to tell us the information about the parameters your required.
Q3 :Can you arrange installations and commissioning in our lab?
A:Firstly, for standard chamber we had 3-5 days commissioning before shipping , you just need link power in your lab, then can start to operate
Secondly;We had detailed operation manual with chamber , any problems you can find and solve in it
Thirdly, some of customized chambers we should to install and teach your team to operate .

If you want to know more information...
Please leave a message below and click " SEND "
Thanks for your time and attention~Thank you!


  High frequency vibration tester electrodynamics XYZ axis vibration testing machine
Model: XB-OTS-DC500
 
Description & Application

 High Frequency Electromagnetic Vibration Test Machine / (Electromagnetic Vibration Test Equipment) is used to educational, research, and laboratory environments. Adopted the double- magnetic circuit structure, self-generated skeleton action circles,  Airborne Support and roller bearings and linear guidance, trunnion isolation advanced modern technology and special technology, can be completed in X,Y,Z three-axis sinusoidal vibration test and broadband random vibration tests, to be completed by the classical (half - sine, trapezoidal, saw tooth wave) pulse and shock response spectrum test. These products are widely used in national defense, weapons, aviation, aerospace, communications, electronics, electrical appliances, communications, home appliances and other fields.



Specification 
Laboratory testing equipment 3-axis electrodynamic vibrator tester High frequency dynamic vibration test machine
 
 Mechanical and Vibration Laboratory Test Equipment feature:
1. Well-designed dynamic circle skeleton, with a higher stage axial resonance frequency.
2. Two-magnetic circuit, magnetic flux leakage low, compact structure and rational.
3. Rocker Rod roller bearings straight and import-oriented composite body stiffness orientation, eccentric load capacity.
4. Trunnion isolation foundation dedicated to hormone use, the installation of mobile convenience.
5. Advanced technology move around the system to ensure that the dynamic circle of high reliability.
6. New duct design and enhance the cooling effect.
7. Static stiffness, dynamic stiffness of the bearing small balloon, raising the vibration table bearing capacity, improve low-frequency performance.
 
Composition of High Frequency Electromagnetic Vibration Test Machine
Vibration test bench, power amplify, cooling fan,Slip table,vertical expander

Horizontal Stand features:
Within small loading bench to realize higher acceleration and working frequency, to improve the loading capacity and performance of whole machine bench.
Horizontal bench and vibration bench are integral type, with perfect structure, convenience to install and adjust.
Static pressure track, V-shape, with capacity of slope-resistant and bias-loading resistant.
Built-in oil pump, good structure and easy operating.


Vertical Extended-bench features:
VT vertical extended-bench and specified clamps, precision calculated, elaborate design, to ensure the customer acquired the best performance according to perfect


Our Company
OTS (Overall Testing System)
Was established in 1978, with 35 years' history
With 30,000 square meter salable production base and 120 employees
Is one of the leading companies solely dedicated to manufacture of
Environmental Simulation Test Chambers ,Physical Testing Equipment .
(such as  constant temperature and humidity chambers, environmental chambers, climatic test chambers, rain and dust test chambers,thermal shock test chambers,fast change rate chambers, salt spray chamber,UV test chambers,walk in test chambers and other special customized test chambers  ;Tensile testing machine, vibration test machine ,carton compression testing machines, bursting strength testing machine etc.) ..
OTS has the equipment and expertise, with own R&D and consultant team, to meet and exceed your testing requirement.With offices in unrivaled quality advantage, dynamic management team with superb manufacturing process,also the quality with the world norms:ISO , ASTM, DIN, EN, GB, BS, JIS, ANSI, UL,CE, TAPPI, AATCC, IEC, VDE...
 


FAQ:
Q1 :Can you customize the product?
A:Yes, we can customize any products according to requirements.Hot selling lab electronic temperature humidity cabinet/Environmental climate test chamber also can be customized.
Q2 :How to choose the most suitable products?
A:Our professional team will give you the best suggestion,just be  patiently to tell us the information about the parameters your required.
Q3 :Can you arrange installations and commissioning in our lab?
A:Firstly, for standard chamber we had 3-5 days commissioning before shipping , you just need link power in your lab, then can start to operate
Secondly;We had detailed operation manual with chamber , any problems you can find and solve in it
Thirdly, some of customized chambers we should to install and teach your team to operate .

If you want to know more information...
Please leave a message below and click " SEND "
Thanks for your time and attention~Thank you!


 

Owing to its quality and competitive pricing, Hydraulic Bending Machine is highly preferred. The offered machine finds its application in several

industries for the purpose of reinforcing and bending bars to various shapes and forms. The machine`s easy installation and operation minimizes the

using of labors. The offered product is highly durable and economical as well.

More Advantages

· Most forms can be produced without extra tools on a bending machine

· Continuous bending from straight to round without interruption on a folding machine

· The bending machine can be operated by one person even if larger pieces are being produced

· A Folding machine is easier on operator fatigue since the component rests flat on the machine bed during operation [as opposed to travelling up in the air]

· Spring back behaviour of different metals and different thicknesses can easily being controlled on a folding machine

· A fully automatic working cycle can be programmed

· Full safety at all times

· The folding machine is fitted with a clamping system, which holds the plate in position for better accuracy

· Cutting errors will result only at the end of the profile on the last bend on a folding machine

· Small variation in material thickness do not affect the bending angle on a folding machine

· A skilled operator is not required as the whole cycle is automatic and managed by the CNC

· Since virtually no changing of tools is required there is a substantial reduction in operating time on a folding machine

· Accurate repeatability due to CNC and high resolution encoders

· Cone and round bending processes are available on a folding machine

· Box bending attachment is available on a folding machine

· The installation of back gauges allow the use of handling devices such as gantry cranes and unloading tables, reducing the operator involvement

· For processes, the like for like folding machine requires less power

· Goat foot tools are easily installed and increase the possibility of complicated bends

· Under present guarding regulations Light guards are not required which saves expense

· A folding machine is more versatile and ready to bend any angle without first setting up tooling

Hydraulic Bending Machine

Hydraulic Bending Machine, NC Bending Machine, Bending Roll Machine, Roll Plate Bending Machine

BOTOU XINGHE ROLL FORMING MACHINERY CO.,LTD , http://www.xhrollformingmachine.com