name | wind power tower |
Materials | Q235B, Q345D, Q345E, SS355NL |
Certification | ISO 9001:2000 |
Others | tubular wind tower, wind power tower, lattice wind tower, hydraulic wind tower, wind turbine tower, wind turbine pole, wind tower, wind pole |
Ridge Cap Roll Forming Machine
Ridge Cap Roll Forming Machine
Colored steel ridge cap forming machine is the machine to produce ridge caps for top part of roof, it is covered on the joint part of the two roofing sheet.
The Ridge cap tile will be used on the ridge of the roof or other place.
It can be used well with the glazed tile produced by roll forming machine.
It can be used well with the trapezoidal tile produced by roll forming machine.
Technique parameters
(1) Processing material: Aluminum/galvanized steel/colored steel coil
(2) Material thickness:0.3- 0.8mm
(3) Product size:5800*1500*1300mm
(4) Main motor power: 4kw
(5) Pump power:4kw
(6) Shaft diameter: 75mm
(7) Forming steps: 13 steps
(8) Roller material: high grade 45# steel, hard Chromium plating
(9) Main frame: 300H Steel
(10) Medium plate thickness: 16mm
(11) Speed:8-12m/min
(12)Material of the cutting blade: Cr 12 mould steel with quenched treatment
(13) Control system: PLC computer control
(14) Power supply: 380V, 3 Phase, 50Hz (can change as customers request)
Components of line
1.Decoiler 1 unit
2.Roll Forming System 1 unit
3.Cutting Device 1 unit
4.Hydraulic Station 1 unit
5.PLC control system 1 unit
Working Flow:
Loading coil – decoiling – guide feeding – main roll forming – hydrarlic cutting – finished products
Ridge Cap Roll Forming Machine
Ridge Cap Roll Forming Machine,Metal Ridge Cap,Roll Forming Machine,Metal Ridge Cap Roll Forming Machine
CANGZHOU DIXIN ROLL FORMING MACHINE CO., LTD , http://www.hebeimachine.com